
The AirTAC SEJ Adjustable Cylinder SEJ125X150-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø125mm unit covers an effective stroke of 120–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X150-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window, yielding an effective travel range of 120 to 150 mm. A rod exits both ends, ensuring the annulus area remains identical in both directions for an equal drive force of 5734 N at 0.5 MPa.
Because the retract end is mechanically set via a stop screw on the back rod, you can fine-tune the end position directly on the machine without swapping hardware. This 125 mm bore unit includes a standard magnet for position sensing and relies on an extruded aluminum barrel with no external tie rods for a clean profile.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X150-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 30 mm (120–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 120-150 mm closure height on a heavy stamping press. The equal 5734 N both-way force handles substantial die weight while the stop screw locks the final position.
Adjust the retract distance on the fly to accommodate different pallet widths. The double-rod design ensures stable, equal clamping speed and force during extension and retraction.
Fine-tune the ejection stroke to safely extract heavy molded parts. The built-in magnet works with DMSE electronic sensors to confirm ejection completion before the mold closes.
Verify the 30 mm adjustment window safely covers your required end-position variance. If you need less force, the adjacent 100 mm bore provides 3681 N at 0.5 MPa; if you need more, note that 125 mm is the largest standard SEJ bore, delivering 5734 N at 0.5 MPa and a maximum of 1169 kgf at 1.0 MPa. If your travel is fixed and never requires mechanical fine-tuning, a standard SED double-rod cylinder is sufficient.
For any application, remember this cylinder does not hold position on air loss; the adjustable air cushion and stop screw decelerate the load near stroke end but do not function as a fail-safe brake. When matching an ISO 15552 replacement, confirm the PT1/2 port, M27x2 rod thread, magnet option, and mounting choice from the available Basic, FA, LB, TC, FTC, TCM1, and TCM2 set.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 30 mm. For a 150 mm nominal stroke, the effective travel range becomes 120 to 150 mm, which you lock in place after setting the exact machine end position.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.