
The AirTAC SEJ Adjustable Cylinder SEJ125X150-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø125mm unit covers an effective stroke of 100–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X150-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the drive force is exactly equal in both directions at 5734 N (0.5 MPa) and 8028 N (0.7 MPa). Because the retract end is mechanically dialable, one unit covers an effective stroke range of 100 to 150 mm.
A stop screw on the back rod lets you dial in the precise retract position on the machine, then lock it down for repeatable changeovers. The extruded aluminum barrel omits external tie rods, and the built-in magnet (-S) directly supports CMSE reed and DMSE electronic sensors for end-of-travel signaling.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X150-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 50 mm (100–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract stop from 100 to 150 mm to accommodate varying metal blank thicknesses in a 125 mm press, leveraging the 5734 N both-way force for consistent forming.
Fine-tune the end position during commissioning to match varying pallet heights on a conveyor, locking the back-rod stop screw precisely to the transfer plane.
Set a precise mechanical end position for diverter arms handling heavy automotive castings, relying on the equal both-way 8028 N force to push and pull the load reliably.
Confirm the 50 mm adjustment window covers your target positioning range. If you need less force, the next bore down is 100 mm providing 3681 N both ways at 0.5 MPa; if you need more, step up to a larger custom actuator. If the end position never varies, a fixed-stroke SED is sufficient. For holding a load on air loss, note this cylinder is not a lock—the adjustable air cushion only decelerates near stroke end, so add an external rod lock for fail-safe holding. ISO 15552 replacement matches require 125 mm bore, 150 mm nominal stroke, PT1/2 ports, and the chosen mounting from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
The 50 mm adjustment window allows you to dial the retract stroke down from the 150 mm nominal maximum to a 100 mm minimum effective stroke, which is ideal for fine-tuning the end position on the machine.
Because the rod exits both ends, the force is identical in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.