
The AirTAC SEJ Adjustable Cylinder SEJ125X160-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø125mm unit covers an effective stroke of 150–160mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X160-10S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so output force is perfectly balanced at 5734 N each way at 0.5 MPa. You can dial the retract end-position up to 10 mm, giving an effective stroke range of 150 to 160 mm for precision machine commissioning.
This 125 mm bore unit features a PT1/2 port, a Ø32 mm rod with an M27x2 thread, and a built-in magnet for CMSE or DMSE sensors. Field-adjustable air cushions at both ends absorb kinetic energy, while the back-rod stop screw lets you lock the exact end position after tuning. The extruded aluminum barrel contains no external tie rods.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X160-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 160 mm |
| Adjustment window | 10 mm (150–160 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×160 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Deliver 5734 N of equal both-way force to form heavy sheet metal, dialing the 10 mm retract window to set precise bottom-dead-stop height.
Apply up to 8028 N at 0.7 MPa for bending thick steel plates, using the adjustable end to tweak the bend angle during machine commissioning.
Drive heavy pallet lifts with 1169 kgf max force, shifting the 10 mm stroke window to accommodate varying pallet heights without changing hardware.
This 10 mm adjustment window is ideal for fine-tuning a final stop on heavy machinery. If your application needs less force, the 100 mm bore provides 3681 N at 0.5 MPa; if you need more, you are already at the maximum standard bore. Because the stroke is 160 mm, external side-load guides are recommended to prevent rod binding. For fixed-position tasks without the need to dial in the end stop, a standard SED cylinder is sufficient. Note that the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock. When replacing an ISO 15552 unit, match the 125 mm bore, 150-160 mm stroke, PT1/2 port, and your specific mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke. For this model, you can dial the end position up to 10 mm, creating an effective stroke range of 150 to 160 mm. You lock the screw after setting the exact position.
Because it is a double-rod cylinder, force is equal in both directions. It provides 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.