
The AirTAC SEJ Adjustable Cylinder SEJ125X175-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø125mm unit covers an effective stroke of 165–175mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X175-10 is a double-acting, double-rod ISO 15552 profile cylinder with a 10mm adjustable stroke window, letting you dial the retract end from 165mm to 175mm. A rod exits both ends, yielding identical annulus areas so thrust matches in both directions at 5734 N each way at 0.5 MPa. The extruded aluminum barrel omits external tie rods.
You set the end position using a stop screw on the back rod, then lock it for precise machine commissioning. This SKU lacks a magnet, so it carries no CMSE or DMSE position sensor. Adjustable air cushions at both ends decelerate the load near stroke end, but they do not hold position on air loss.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X175-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 175 mm |
| Adjustment window | 10 mm (165–175 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×175 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10mm stop screw to precisely set the 175mm end position when stamping thick steel plates, using the 5734 N both-way force to press and retract consistently.
Adjust the retract end to match varying panel thicknesses on a CNC router, using the equal double-rod force to hold 125mm bore pressure without deflection.
Dial in the exact 165-175mm retracted position during machine changeovers to align heavy mold halves, locking the back rod stop once the gap is set.
Verify the 10mm adjustment window covers your fine-tuning range; the effective stroke spans 165-175mm. If you need less force, the 100mm bore delivers 3681 N at 0.5 MPa both ways, while stepping up is impossible as 125mm is the largest size. A fixed-stroke SED is enough if you need no on-machine adjustment. For fail-safe holding, add an external rod lock, as the cushion and stop screw are not brakes. When replacing an ISO 15552 cylinder, match the 175mm stroke, PT1/2 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 10mm, giving an effective stroke range of 165-175mm. You lock the screw after setting the exact end position.
Because it is a double-rod cylinder, force is equal in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.