
The AirTAC SEJ Adjustable Cylinder SEJ125X175-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø125mm unit covers an effective stroke of 145–175mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X175-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the drive force is perfectly equal in both directions at 5734 N (0.5 MPa). By turning the stop screw on the back rod, you dial the retract end down, giving an effective stroke range of 145 to 175 mm.
This unit carries a Ø32 mm rod with an M27x2 thread and a PT1/2 port. Field-adjustable air cushions at both ends decelerate the heavy 125 mm bore payload smoothly. This SKU lacks a magnet, so it does not support position sensing without modification.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X175-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 175 mm |
| Adjustment window | 30 mm (145–175 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×175 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 5734 N of equal both-way force, this cylinder dials in the exact 145-175 mm clamp depth on large stamping dies during setup.
Adjust the retract stop on the fly by 30 mm to accommodate different pallet heights without swapping out the entire 125 mm bore actuator.
Confirm the 30 mm adjustment window safely covers your end-position variance. If you need less force, stepping down to the 80 mm bore provides 2268 N at 0.5 MPa; stepping up is not possible as 125 mm is the largest SEJ size. For fixed-position tasks requiring no fine-tuning, a standard SED double-rod cylinder is sufficient.
The adjustable cushion and stop screw decelerate the load near stroke end but do not hold position on air loss; fail-safe holding requires an external rod lock. Because the stroke is 175 mm, ensure external guides manage side loads to protect the M27x2 rod threads.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 30 mm. For this 175 mm nominal stroke model, the effective stroke range is 145 to 175 mm, which you lock in place after fine-tuning the machine end position.
Because it is a double-rod cylinder, the force is identical in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.