verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X175-75S

The AirTAC SEJ Adjustable Cylinder SEJ125X175-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø125mm unit covers an effective stroke of 100–175mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke175 mm
  • Adjust window75 mm
  • Effective stroke100–175 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$335.89 $343.39Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X175-75S

The AirTAC SEJ125X175-75S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75 mm adjustable stroke window, yielding an effective stroke range of 100-175 mm. A second rod exits the rear head, making the annular area identical on both sides. This provides equal force in both directions, delivering 5734 N at 0.5 MPa and 8028 N at 0.7 MPa each way.

You dial in the exact retract end-position using a stop screw on that back rod, then lock it down—perfect for fine-tuning a heavy stop on the machine without swapping hardware. Equipped from the factory with a -S magnet, it supports CMSE reed and DMSE electronic sensors for precise end-of-travel signaling.

Airtac SEJ Adjustable Cylinder SEJ125X175-75S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X175-75S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke175 mm
Adjustment window75 mm (100–175 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X175-75S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×175Nominal stroke length in mm.
-75Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X175-75S Is Used

precision_manufacturing

Heavy Press Brake Gauging

Dial the 75 mm retract window to fine-tune the backgauge stop on a thick-plate press brake, using the 8028 N both-way force to position heavy material stops accurately.

swap_horiz

Automated Welding Line Changeover

Adjust the effective stroke from 100 to 175 mm to rapidly switch a robotic welding fixture between two different automotive chassis heights without changing cylinders.

factory

Stamping Press Loading

Feed varying blank sizes into a large stamping press, relying on the equal push/pull force and 40 mm adjustable air cushions to absorb heavy end-of-stroke impacts.

Is the Airtac SEJ Adjustable Cylinder SEJ125X175-75S the Right Cylinder?

Confirm this 75 mm adjustment window safely covers your end-position tuning range. If you need less fine-tune span, a fixed-stroke SED is simpler and shorter. For sizing both ways: stepping down to the 100 mm bore yields 3681 N at 0.5 MPa, while no larger standard bore exists in this range (the 125 mm bore hits 1169 kgf max at 1.0 MPa). When replacing an ISO 15552 unit, match the bore, stroke, window, PT1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note: the adjustable air cushion decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock.

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (75mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 75mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X175-75S FAQ

A stop screw on the rear rod mechanically shortens the retract stroke over a 75 mm window. Your effective stroke range is 100 to 175 mm. You set the exact end-position on the machine, then lock the screw.

Because it is a double-rod cylinder, force is equal both ways: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa. The operating speed range is 30-500 mm/s.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X175-75S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X175-75S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.