
The AirTAC SEJ Adjustable Cylinder SEJ125X200-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø125mm unit covers an effective stroke of 100–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X200-100S is a double-acting, double-rod ISO 15552 profile cylinder with a 125mm bore and 200mm nominal stroke. A rod exits both ends, yielding equal force in both directions at 5734 N each way at 0.5 MPa. The retract stroke is mechanically adjustable via a back-rod stop screw over a 100mm window, giving an effective stroke range of 100-200mm.
This design allows precise end-position tuning directly on the machine without hardware changes. The extruded aluminum barrel omits external tie rods, and the field-adjustable air cushion at both ends decelerates the load near stroke end. The integrated magnet (-S) supports CMSE reed and DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X200-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 100 mm (100–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100-200mm stroke window to precisely set the crushing end-position on a 5734N metal stamping press during commissioning.
Adjust the retract stop to match different pallet thicknesses on a packaging line, using the 1169 kgf max capacity to shift heavy loads.
Tune the ejection distance of heavy parts from a mold, relying on equal both-way force to maintain consistent retraction speed.
Confirm the 100mm adjustment window covers your required end-position variance. If you need less fine-tuning range, a fixed-stroke SED is sufficient. Stepping down to the 100mm bore yields 3681 N at 0.5 MPa, while this 125mm bore provides 5734 N at 0.5 MPa and 8028 N at 0.7 MPa. The plain cylinder does not hold position on air loss; the stop screw only sets the mechanical end. For fail-safe holding, use an external rod lock. Match ISO 15552 replacements by bore, stroke, PT1/2 port, and mounting.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
The retract stroke is adjustable up to 100mm via a stop screw on the back rod. The effective stroke range is 100-200mm, which you lock after setting the precise machine end-position.
Because the rod exits both ends, force is equal in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.