
The AirTAC SEJ Adjustable Cylinder SEJ125X200-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø125mm unit covers an effective stroke of 150–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X200-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rear stop screw lets you dial the retract end position anywhere between 150 mm and 200 mm without swapping hardware.
This 125 mm bore unit runs on PT1/2 ports and a Ø32 mm rod with an M27x2 thread. It lacks a position magnet, so no CMSE or DMSE sensors can be fitted to this specific SKU. The field-adjustable air cushion at both ends decelerates the heavy 1169 kgf max load near stroke end, though it is not a mechanical lock.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X200-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 50 mm (150–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 150-200 mm retract position to match varying die heights during press setup, using the 5734 N both-way force to shift heavy platens.
Fine-tune the metal bending stop on the fly during commissioning, locking the back-rod screw once the 8028 N at 0.7 MPa forms the perfect angle.
Adjust the diverting stroke for different pallet widths without replacing the cylinder, leveraging the equal push and pull force for smooth transitions.
The 50 mm adjustment window is ideal for fine-tuning a precise 150 to 200 mm end position during machine commissioning or changeovers. If you need less force, stepping down to the 100 mm bore yields 3681 N both ways at 0.5 MPa. If you require higher output, this 125 mm bore is the largest available, providing 8028 N at 0.7 MPa.
If your end position never varies, a fixed-stroke SED cylinder is sufficient and shorter overall. For fail-safe load holding on air loss, note that this cylinder does not hold position; you must pair it with an external rod lock like a BSED. Ensure your ISO 15552 replacement matches the PT1/2 port, 50 mm window, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
The rear stop screw provides a 50 mm adjustment window. You can dial the effective retract stroke from 150 mm up to the nominal 200 mm, allowing precise end-position tuning on the machine without changing hardware.
Because the rod exits both ends, force is equal in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.