verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X200-50S

The AirTAC SEJ Adjustable Cylinder SEJ125X200-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø125mm unit covers an effective stroke of 150–200mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke200 mm
  • Adjust window50 mm
  • Effective stroke150–200 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$348.25 $355.75Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X200-50S

The AirTAC SEJ125X200-50S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas and an equal drive force of 5734 N each way at 0.5 MPa. The integrated -50 mm stop screw window lets you dial the retract end from 150 to 200 mm without swapping hardware.

Because the rod exits both ends, you can mount a cam or flag on the rear rod for external tracking. The extruded aluminum barrel omits external tie rods for a clean profile, and the -S magnet supports CMSE reed and DMSE electronic sensors for precise end-position detection.

Airtac SEJ Adjustable Cylinder SEJ125X200-50S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X200-50S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke200 mm
Adjustment window50 mm (150–200 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X200-50S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×200Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X200-50S Is Used

precision_manufacturing

Heavy Press Tonnage Dial-In

Use the 5734 N equal both-way force and 150-200 mm adjustable stroke to precisely set the bottom dead center on a heavy metal stamping press during commissioning.

view_module

Automated Pallet Changeover

Adjust the retract end position by up to 50 mm to accommodate different pallet heights in a conveyor transfer system without disassembling the cylinder hardware.

factory

Mold Alignment Trial

Leverage the double-rod design to mount a rear cam for sensor feedback while fine-tuning the exact clamping position of large injection molds within the 40 mm cushion zone.

Is the Airtac SEJ Adjustable Cylinder SEJ125X200-50S the Right Cylinder?

Verify the 50 mm adjustment window covers your machine's end-position range, yielding an effective 150 to 200 mm stroke. If you need less force, the next bore down is 100 mm delivering 3681 N at 0.5 MPa; if you need more, step up to this 125 mm bore yielding 5734 N at 0.5 MPa. If your application never requires stroke changes, a fixed-stroke SED cylinder is sufficient. Remember that a plain SEJ does not hold position on air loss; the adjustable air cushion at both ends decelerates near stroke end but is not a mechanical lock. For fail-safe holding, use an external rod lock. Ensure your ISO 15552 replacement matches the PT1/2 port, M27x2 rod thread, and your preferred mounting from Basic, FA, LB, TC, FTC, TCM1, or TCM2.

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X200-50S FAQ

A mechanical stop screw on the back rod lets you dial the retract stroke over a 50 mm window, giving an effective stroke range of 150 to 200 mm. You lock the screw after setting the exact end position.

Because the rod exits both ends, the force is identical in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X200-50S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X200-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.