
The AirTAC SEJ Adjustable Cylinder SEJ125X200-75 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø125mm unit covers an effective stroke of 125–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X200-75 is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 5734 N each way at 0.5 MPa. The integrated stop screw on the back rod lets you dial the retract end over a 75 mm window, setting an effective stroke range of 125 to 200 mm.
This 125 mm bore actuator runs at 30-500 mm/s and uses a PT1/2 port with a Ø32 mm rod. Adjustable air cushions at both ends decelerate the heavy moving load near stroke end. This SKU lacks a magnet, so it does not support CMSE or DMSE position sensors without modification.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X200-75 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 75 mm (125–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 75 mm retract window to match varying press die heights precisely, utilizing the 8028 N both-way force at 0.7 MPa to form heavy gauge metal parts.
Fine-tune the clamping position of large machining fixtures during commissioning, using the equal both-way force to secure bulky cast iron blocks.
Confirm the 75 mm adjustment window covers your required end-position variance. If you need less force, the neighboring 100 mm bore provides 3681 N both ways at 0.5 MPa; stepping up is not an option as 125 mm is the largest standard SEJ size. If the exact stroke is fixed and never changes, a standard SED double-rod cylinder provides the same force without the adjustment hardware. Note that the air cushion and mechanical stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock or BSED variant. Because the stroke is under 300 mm, side-load stress is manageable, but always guide the external rod end to prevent binding.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke. For this SEJ125X200-75 model, you can adjust the retract end over a 75 mm window, creating an effective stroke range of 125 to 200 mm. You lock the screw after setting your desired end position.
Because it is a double-rod cylinder, the force is identical in both directions. It delivers 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.