
The AirTAC SEJ Adjustable Cylinder SEJ125X225-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø125mm unit covers an effective stroke of 175–225mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X225-50 is a double-acting, double-rod ISO 15552 profile cylinder offering equal force in both directions, delivering 5734 N each way at 0.5 MPa. A rod exits both ends, meaning the annulus area is identical for extend and retract strokes.
This unit features a 50 mm adjustable stroke window via a stop screw on the back rod, allowing you to dial the retract end position precisely. The effective stroke ranges from 175 mm up to the full 225 mm. It carries a PT1/2 port, a 32 mm rod, and adjustable air cushions at both ends to manage deceleration over its 40 mm cushion length.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X225-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 225 mm |
| Adjustment window | 50 mm (175–225 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×225 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivers 5734 N both ways to form heavy sheet metal, while the 50 mm retract adjustment lets you dial the exact bottoming height for different die sets.
Handles large pallet transfers at 30-500 mm/s, using the 175-225 mm effective stroke range to accommodate varying pallet thicknesses without swapping hardware.
Clamps bulky castings securely with equal extend and retract force, fine-tuning the clamp position up to 50 mm during machine commissioning.
Verify the 50 mm adjustment window covers your required end-position range. If you need less force, the adjacent 100 mm bore provides 3681 N at 0.5 MPa; stepping up is not applicable as 125 mm is the largest SEJ size. If the exact stroke never varies after commissioning, a fixed-stroke SED cylinder is sufficient.
This SKU lacks a magnet, so position sensing via CMSE or DMSE sensors is not supported without changing the configuration. Note that the adjustable air cushion and stop screw decelerate the load near stroke end but do not lock position on air loss; for fail-safe holding, use an external rod lock.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
The SEJ125X225-50 has a 50 mm adjustment window. You can mechanically dial the retract stroke from 175 mm up to the nominal 225 mm using the back-rod stop screw, then lock it in place.
Being a double-rod cylinder, it outputs equal force both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa. It is dimensionally interchangeable per ISO 15552.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.