
The AirTAC SEJ Adjustable Cylinder SEJ125X250-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø125mm unit covers an effective stroke of 150–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X250-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. You can mechanically dial the retract end from 150mm up to 250mm via a back-rod stop screw, eliminating the need to swap hardware when fine-tuning machine end positions. Because a rod exits both ends, the annulus area is symmetrical, delivering an equal force of 5734 N each way at 0.5 MPa.
This extruded aluminum barrel omits external tie rods for a clean ISO 15552 dimensional interchangeability. It includes field-adjustable air cushions at both ends to decelerate the heavy 125mm payload near stroke end, and the built-in -S magnet integrates directly with CMSE reed or DMSE electronic sensors. Remember the stop screw sets a mechanical end; it is not a fail-safe lock, so use an external rod lock for position holding on air loss.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X250-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 100 mm (150–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 150-250mm retract range to precisely set die height during press commissioning, leveraging the 8028 N both-way force to form heavy gauge sheet metal without overshooting the mechanical stop.
Adjust the stop screw on the fly to match varying package sizes on a sorting line, using the equal push and pull forces to positively redirect bulky inventory without speed mismatch.
Fine-tune the electrode approach distance for trial positioning on prototype chassis parts, relying on the 40mm adjustable air cushion to safely decelerate the large 125mm bore mass before contact.
Verify the 100mm adjustment window covers your variable-stop range, giving an effective 150-250mm stroke for changeover between different part heights. If 5734 N at 0.5 MPa (or 8028 N at 0.7 MPa) is excessive, step down to the 100mm bore which provides 3681 N both ways at 0.5 MPa. If you need even more power, this 125mm bore is the largest standard size, offering a maximum 1169 kgf at 1.0 MPa. If your application never requires end-position tuning, a fixed-stroke SED cylinder provides the same double-rod equal force in a shorter overall length. When matching an ISO 15552 replacement, confirm the 250mm stroke, 100mm window, PT1/2 port, and your chosen mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
The 100mm adjustment window lets you mechanically shorten the retract stroke from the nominal 250mm down to 150mm. You set the exact end position using the back-rod stop screw and lock it in place, meaning one cylinder covers a 150-250mm range without changing hardware.
Because the rod exits both ends, force is identical in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.