
The AirTAC SEJ Adjustable Cylinder SEJ125X250-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø125mm unit covers an effective stroke of 240–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X250-10S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical extend and retract forces of 5734 N at 0.5 MPa. The retract stroke is mechanically adjustable via a stop screw on the back rod over a 10 mm window, providing an effective stroke range of 240 to 250 mm for precise on-machine end-position tuning.
This large-bore actuator features a Ø32 mm rod, M27x2 rod-end thread, and PT1/2 ports. It includes field-adjustable air cushions at both ends to manage heavy kinetic energy. The integrated -S magnet enables position detection with CMSE reed or DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X250-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 10 mm (240–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10 mm window to set exact 240-250 mm bottom-dead-center on a press, using the 5734 N both-way force to seat heavy stamping dies accurately.
Adjust the retract end to match varying pallet heights during format changeovers, leveraging the equal push/pull force to shift heavy fixtures smoothly.
Fine-tune the mold close position during commissioning, relying on the 40 mm adjustable air cushion to decelerate the 125 mm bore before the final stop.
Confirm this 10 mm adjustment window covers your fine-tuning span; the effective stroke dials from 240 mm up to 250 mm. If you need less force, the adjacent bore down is 100 mm delivering 3681 N at 0.5 MPa. If you need more output, step up to the 125 mm bore's maximum 1169 kgf at 1.0 MPa. If your stroke is permanently fixed, a standard SED double-rod cylinder provides the same equal-force output without the adjustment hardware.
For ISO 15552 dimensional replacements, verify the 250 mm stroke, PT1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the air cushion and stop screw decelerate the load near stroke end but do not hold position on air loss; fail-safe holding requires an external rod lock. Because stroke is 250 mm, ensure external guides support side loads to protect the seal.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically limits the retract stroke over a 10 mm window. You can dial the effective stroke from 240 mm up to 250 mm, then lock the screw in place for a precise end position.
Because it is a double-rod cylinder, force is identical in both directions. It provides 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.