verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X250-20S

The AirTAC SEJ Adjustable Cylinder SEJ125X250-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø125mm unit covers an effective stroke of 230–250mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke250 mm
  • Adjust window20 mm
  • Effective stroke230–250 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$373.37 $380.87Save 1% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X250-20S

The AirTAC SEJ125X250-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window, yielding an effective stroke range of 230 to 250mm. A rod exits both ends, ensuring the annulus area remains identical for equal force and speed in both directions—delivering about 5734 N each way at 0.5 MPa. The included -S magnet enables position detection with CMSE reed or DMSE electronic sensors.

You dial in the retract end position via a stop screw on the back rod, locking it after setting the exact 230-250mm travel. This 125mm bore pneumatic cylinder uses a PT1/2 port, a Ø32mm rod with an M27x2 thread, and features field-adjustable air cushions at both ends to decelerate heavy loads near stroke end.

Airtac SEJ Adjustable Cylinder SEJ125X250-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X250-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke250 mm
Adjustment window20 mm (230–250 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X250-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×250Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X250-20S Is Used

precision_manufacturing

Press Die Changeover

Dial the 20mm retract stop to match varying die heights during press setup, using the 8028 N both-way force to shift heavy lower dies precisely.

straighten

Heavy Panel Positioning

Fine-tune the end stop during sheet metal alignment, leveraging the equal push/pull force to prevent deflection on 250mm strokes without external guides.

sync_alt

Pallet Transfer Braking

Adjust the retract window to brake varying pallet lengths on a conveyor, using the 1169 kgf max capacity to halt heavy loads smoothly.

Is the Airtac SEJ Adjustable Cylinder SEJ125X250-20S the Right Cylinder?

Verify the 20mm adjustment window covers your fine-tuning range; if you need a wider span, consider a different -NN option. For sizing, the neighboring bore down is 100mm (providing 3681 N both ways at 0.5 MPa), while stepping up is not applicable as 125mm is the largest standard SEJ size. If your end position never changes, a fixed-stroke SED cylinder is sufficient.

This model delivers 5734 N at 0.5 MPa and 8028 N at 0.7 MPa both ways, with a maximum of 1169 kgf at 1.0 MPa. Remember that a plain SEJ does not hold position on air loss—the cushion and stop screw only set the mechanical end and decelerate, so use an external rod lock for fail-safe holding. When replacing an ISO 15552 cylinder, match the 125mm bore, 250mm nominal stroke, 20mm window, PT1/2 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X250-20S FAQ

The stop screw on the back rod allows you to dial the retract stroke over a 20mm window, making the effective stroke adjustable from 230mm up to the full 250mm.

Because the rod exits both ends, force is equal in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X250-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X250-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.