verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X250-50S

The AirTAC SEJ Adjustable Cylinder SEJ125X250-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø125mm unit covers an effective stroke of 200–250mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke250 mm
  • Adjust window50 mm
  • Effective stroke200–250 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$373.37 $380.87Save 1% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X250-50S

The AirTAC SEJ125X250-50S is a double-acting, double-rod ISO 15552 profile cylinder with a 50mm adjustable stroke window. A stop screw on the rear rod lets you dial the retract end from 200mm up to 250mm, perfect for fine-tuning a machine end position without swapping hardware.

This bore features a Ø32mm rod, an M27x2 rod-end thread, and PT1/2 ports. The extruded aluminum barrel carries no external tie rods, and adjustable air cushions at both ends absorb kinetic energy near stroke end. Equipped with a standard magnet, it supports CMSE reed and DMSE electronic sensors for position feedback.

Airtac SEJ Adjustable Cylinder SEJ125X250-50S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X250-50S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke250 mm
Adjustment window50 mm (200–250 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X250-50S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×250Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X250-50S Is Used

precision_manufacturing

Heavy Press Tonnage Calibration

Dial the 50mm retract window to precisely set forming depth on heavy metal presses, utilizing the massive 8028 N both-way force at 0.7 MPa for consistent high-tonnage strokes.

swap_horiz

Automated Pallet Changeover

Adjust the effective stroke between 200mm and 250mm to accommodate different pallet heights during automated line changeovers without replacing the cylinder.

factory

Injection Mold Clamping

Fine-tune the mold closure end-point on large injection molding machines, relying on the equal double-rod force to maintain balanced clamping pressure across the 125mm bore.

Is the Airtac SEJ Adjustable Cylinder SEJ125X250-50S the Right Cylinder?

Verify the 50mm adjustment window covers your required end-position range. If you need less force, the adjacent bore down is 100mm, providing 3681 N at 0.5 MPa; if you need more, note that 125mm is the largest standard SEJ bore, delivering 5734 N at 0.5 MPa and a maximum of 1169 kgf at 1.0 MPa. If your application never requires stroke changes, a fixed-stroke SED cylinder offers a simpler setup.

For any stroke at or above 300mm, external guides are recommended to manage side loads, though the robust Ø32mm rod here handles high axial loads well. Remember that the adjustable cushion and stop screw decelerate the piston near stroke end but do not hold position on air loss; for fail-safe holding, specify an external rod lock. Ensure your ISO 15552 replacement matches this 125mm bore, 250mm stroke, PT1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X250-50S FAQ

The SEJ125X250-50S features a stop screw on the rear rod that mechanically shortens the retract stroke. You can adjust the effective stroke anywhere from 200mm up to the nominal 250mm, then lock the screw in place for precise end-position tuning on your machine.

Because it is a double-rod cylinder, the force is identical in both extend and retract directions. It provides 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X250-50S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X250-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.