verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X30-20S

The AirTAC SEJ Adjustable Cylinder SEJ125X30-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø125mm unit covers an effective stroke of 10–30mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke30 mm
  • Adjust window20 mm
  • Effective stroke10–30 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$281.92 $289.42Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X30-20S

The AirTAC SEJ125X30-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, yielding identical annular areas so thrust is equal in both directions at 5734 N each way at 0.5 MPa. The integrated -S magnet enables position detection with CMSE reed or DMSE electronic sensors.

A mechanical stop screw on the back rod lets you dial the retract end down, providing an effective stroke range of 10 to 30mm for precise machine commissioning. The extruded aluminum barrel contains no external tie rods, and field-adjustable air cushions at both ends decelerate the heavy 125mm payload near stroke end.

Airtac SEJ Adjustable Cylinder SEJ125X30-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X30-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke30 mm
Adjustment window20 mm (10–30 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X30-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×30Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X30-20S Is Used

precision_manufacturing

Press Tonnage Calibration

Delivering 5734 N both ways at 0.5 MPa, this cylinder dials its 10-30mm stroke to find the exact contact point during press force calibration.

straighten

Heavy Panel Bending Stop

Set a variable mechanical stop for bending thick metal panels; the 20mm window lets operators changeover to different bend depths without swapping hardware.

tune

Clamp Force Commissioning

Fine-tune the clamping reach on an assembly fixture, using the back-rod stop screw to match part height variations precisely before locking it down.

Is the Airtac SEJ Adjustable Cylinder SEJ125X30-20S the Right Cylinder?

Confirm the 20mm adjustment window covers your required end-position variance, giving an effective 10-30mm stroke. Stepping down to the 80mm bore yields 2268 N at 0.5 MPa both ways, while stepping up is unavailable as 125mm is the largest SEJ profile size. If you do not need on-machine adjustability, a fixed-stroke SED125X30 saves cost. Remember this plain cylinder does not hold position on air loss; the cushion and stop screw only set the mechanical end, so specify a BSED or external rod lock for fail-safe holding. Match the PT1/2 port, M27x2 rod thread, and your required mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2) for a direct ISO 15552 replacement.

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X30-20S FAQ

A stop screw on the rear rod mechanically shortens the retract stroke over a 20mm window. This means your effective stroke is adjustable from 10mm up to the nominal 30mm, which you lock in place during machine commissioning.

Because it is a double-rod cylinder, force is equal both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X30-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X30-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.