verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X30-30S

The AirTAC SEJ Adjustable Cylinder SEJ125X30-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø125mm unit covers an effective stroke of 0–30mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke30 mm
  • Adjust window30 mm
  • Effective stroke0–30 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$281.92 $289.42Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X30-30S

The AirTAC SEJ125X30-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is perfectly symmetrical: 5734 N each way at 0.5 MPa. The rear stop screw lets you dial the retract end from 0 to 30 mm, providing exact end-position tuning without swapping hardware.

Equipped with a standard magnet (-S), it supports CMSE reed and DMSE electronic sensors for precise position feedback. The extruded aluminum barrel contains no external tie rods, and field-adjustable air cushions at both ends decelerate the heavy 125 mm payload smoothly near stroke end.

Airtac SEJ Adjustable Cylinder SEJ125X30-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X30-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke30 mm
Adjustment window30 mm (0–30 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X30-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×30Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X30-30S Is Used

precision_manufacturing

Press Die Changeover

Dial the 0-30 mm retract stop to match varying die thicknesses during press tooling setups, using the 5734 N both-way force to shift heavy lower bolsters securely.

factory

Heavy Weldment Clamping

Fine-tune the clamping end-position on oversized robotic weld fixtures, ensuring parts seat perfectly against stops before the 8028 N @0.7 MPa clamping force is applied.

straighten

Bending Machine Back-Gauge

Adjust the rear rod stop for precise material positioning on heavy plate bending machines, relying on the rigid double-rod design to resist rotational side loads.

Is the Airtac SEJ Adjustable Cylinder SEJ125X30-30S the Right Cylinder?

Confirm the 30 mm adjustment window covers your variable-stop or changeover distance. For high-force trial positioning, the 125 mm bore delivers 5734 N at 0.5 MPa. If you need less force, step down to the 100 mm bore (3681 N both ways); if you need more, this is the largest standard ISO 15552 size. If the stroke never varies, a fixed-stroke SED saves length and cost. A plain SEJ does not hold position on air loss; for fail-safe holding, specify a BSED or add an external rod lock. Ensure your ISO 15552 replacement matches the 125 mm bore, 30 mm stroke, PT1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, TCM2).

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X30-30S FAQ

A stop screw on the back rod mechanically shortens the retract stroke over a 30 mm window. You can dial the effective stroke from 0 to 30 mm to fine-tune the machine end position, then lock it in place.

Because it is a double-rod cylinder, force is equal in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, with a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X30-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X30-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.