
The AirTAC SEJ Adjustable Cylinder SEJ125X300-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø125mm unit covers an effective stroke of 200–300mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X300-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. A rear stop screw lets you dial the retract end position down to a 200mm effective stroke, perfect for fine-tuning a 300mm maximum travel distance on the machine without swapping hardware. A rod exits both ends, yielding equal force and speed in both directions, delivering about 5734 N each way at 0.5 MPa.
This 125mm bore unit includes a magnet for CMSE reed and DMSE electronic sensors. It features field-adjustable air cushions at both ends over a 40mm cushion length, and its extruded aluminum barrel omits external tie rods for a clean ISO 15552 dimensional interchangeability. The PT1/2 port and Ø32mm rod with an M27x2 thread handle heavy loads securely.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X300-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 300 mm |
| Adjustment window | 100 mm (200–300 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×300 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 5734 N both ways at 0.5 MPa, dial the 100mm stop screw to perfectly set the 200-300mm retract depth when calibrating forming presses for different material thicknesses.
Use the equal both-way force and adjustable end-position to clamp varying part heights on a heavy-duty welding fixture, locking the back-rod stop precisely where the 125mm bore meets the workpiece.
Adjust the retract stroke on the fly to accommodate different pallet sizes on an automated packaging line, using the M27x2 rod thread and 40mm adjustable air cushion to handle heavy 1169 kgf peak loads smoothly.
Confirm the 100mm adjustment window covers your required end-position range. If you need less force, the next bore down is 100mm, providing 3681 N both ways at 0.5 MPa. If you require more, note that 125mm is the largest standard SEJ bore, offering 8028 N at 0.7 MPa. If your travel distance never changes, a fixed-stroke SED cylinder is sufficient. For stroke lengths of 300mm or more, external guide rails are strongly recommended to prevent rod side-loading and premature wear. The air cushion decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, use an external rod lock or BSED series. When replacing an ISO 15552 cylinder, match the 125mm bore, 300mm nominal stroke, 100mm window, PT1/2 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 100mm window. You can dial the effective stroke anywhere from 200mm up to the 300mm nominal length, then lock it in place during commissioning.
Because the rod exits both ends, force is identical in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa. Speed ranges from 30-500 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.