
The AirTAC SEJ Adjustable Cylinder SEJ125X450-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø125mm unit covers an effective stroke of 440–450mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X450-10 is a double-acting, double-rod profile cylinder dimensionally interchangeable per ISO 15552. A rod exits both ends, yielding identical annulus areas so thrust matches retraction exactly.
This unit features a 10 mm adjustable stroke window, letting you dial the retract end from 440 to 450 mm via a back-rod stop screw. Once the machine position is set, you lock the screw. It carries a PT1/2 port, a 32 mm rod with an M27x2 thread, and adjustable air cushions at both ends to decelerate heavy 125 mm loads.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X450-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 450 mm |
| Adjustment window | 10 mm (440–450 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×450 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10 mm retract window to set a precise 440-450 mm bottoming position on a 125 mm forming press, leveraging the 8028 N both-way force to seat heavy tooling.
Adjust the end position to match varying pallet heights during format changeovers, using the equal double-rod force to push and pull 1169 kgf loads smoothly.
Micro-adjust the 450 mm stroke during automotive fixture prototyping, relying on the 32 mm rod and field-adjustable cushions to handle massive trial assemblies.
Verify the 10 mm adjustment window covers your fine-tuning range. If you need less force, stepping down to the 80 mm bore yields 2268 N at 0.5 MPa. If you require more, this 125 mm bore is the largest standard SEJ size, delivering 8028 N at 0.7 MPa and a maximum 1169 kgf at 1.0 MPa. If your positioning never changes after commissioning, a fixed-stroke SED could suffice.
Because the stroke is 450 mm, fit external guides to prevent rod side-load and protect the M27x2 thread. This SKU lacks a magnet, so it cannot host CMSE or DMSE sensors. The stop screw and cushions decelerate motion but will not hold position on air loss; use an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 10 mm window. Your effective stroke range is 440 to 450 mm. You dial the exact end position during machine commissioning, then lock the screw.
Because it is a double-rod cylinder, force is equal in both directions. It generates 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.