verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X50-10S

The AirTAC SEJ Adjustable Cylinder SEJ125X50-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø125mm unit covers an effective stroke of 40–50mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke50 mm
  • Adjust window10 mm
  • Effective stroke40–50 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$281.92 $289.42Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X50-10S

The AirTAC SEJ125X50-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated 10mm adjustable stroke window. A stop screw on the back rod lets you dial the retract end position down to a 40-50mm effective stroke, perfect for fine-tuning a precise machine stop without swapping hardware.

This 125mm bore profile cylinder uses a PT1/2 port and a 32mm rod with an M27x2 thread. The integrated -S magnet enables position sensing with CMSE reed or DMSE electronic switches. Adjustable air cushions at both ends decelerate the heavy 1169 kgf maximum load near stroke end, while the back-rod stop mechanism can carry a cam for external actuation.

Airtac SEJ Adjustable Cylinder SEJ125X50-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X50-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke50 mm
Adjustment window10 mm (40–50 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X50-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×50Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X50-10S Is Used

precision_manufacturing

Heavy Press Fine-Tuning

Dial in the exact 40-50mm clamping depth on a heavy-duty assembly press using the 8028 N both-way force and 10mm stop screw window during commissioning.

swap_horiz

Variable Part Changeover

Adjust the retract stroke on the fly to match different height components on a machining line, relying on the equal push and pull forces to handle heavy pallets.

factory

Cam-Actuated Ejection

Use the extended back rod to mount a cam for timing an ejection sequence, while the 1169 kgf maximum capacity handles substantial metal workpieces.

Is the Airtac SEJ Adjustable Cylinder SEJ125X50-10S the Right Cylinder?

When sizing this cylinder, compare its 5734 N both-way force at 0.5 MPa with the neighboring bores: stepping down to a 100mm bore yields 3681 N, while stepping up is beyond standard stock. The 10mm adjustment window is ideal if your machine changeover requires precise end-position tuning between 40mm and 50mm. If your application never requires stroke adjustment, a fixed-stroke SED double-rod cylinder provides the same equal-force dynamics more simply. Remember that the adjustable cushion and stop screw only set the mechanical end and decelerate motion; they do not hold position on air loss, so an external rod lock is required for fail-safe holding. For any stroke length over 300mm, external guides are recommended to manage side loads.

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X50-10S FAQ

A stop screw on the rear rod mechanically shortens the retract stroke over a 10mm window. You can dial the effective stroke anywhere from 40mm up to the nominal 50mm, then lock it in place for precise end-position tuning.

Because it is a double-rod design, force is equal in both directions. It provides 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X50-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X50-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.