
The AirTAC SEJ Adjustable Cylinder SEJ125X50-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø125mm unit covers an effective stroke of 30–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X50-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring an adjustable stroke. A rear stop screw lets you dial the retract end over a 20mm window, yielding an effective stroke range of 30 to 50mm.
This 125mm bore pneumatic cylinder uses a PT1/2 port and a robust Ø32mm rod with an M27x2 thread. It includes field-adjustable air cushions at both ends to decelerate heavy loads near the stroke limits. The integrated -S magnet enables precise end-position detection using CMSE reed or DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X50-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 20 mm (30–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 30-50mm clamping stroke on a hydraulic press die, leveraging the 5734N both-way force to securely hold and release heavy metal sheet blanks.
Rapidly reconfigure end-stops when switching a packaging line to different carton heights, using the 20mm adjustment window to match new format requirements precisely.
Fine-tune the bend angle on a thick steel bender by adjusting the retract position on the fly, relying on the symmetrical rod geometry to maintain consistent push and pull forces.
This 20mm adjustment window is ideal for fine-tuning a 30-50mm end position during machine commissioning without swapping hardware. If your application requires less force, the neighboring 100mm bore provides 3681N both ways at 0.5 MPa; if you need more, the 125mm bore is the largest available, delivering a maximum of 1169kgf at 1.0 MPa. For fixed-position tasks that never require repositioning, a standard SED double-rod cylinder is sufficient. Remember that the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock. As a dimensionally interchangeable ISO 15552 cylinder, ensure your replacement matches the 50mm stroke, 20mm window, PT1/2 port, and chosen mounting from the Basic, FA, LB, TC, FTC, TCM1, or TCM2 set.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A mechanical stop screw on the rear rod shortens the retract stroke over a 20mm window. You can adjust the effective stroke anywhere from 30mm up to the nominal 50mm, then lock the screw in place.
Because it is a double-rod cylinder, the force is identical in both directions: 5734N at 0.5 MPa, 8028N at 0.7 MPa, and a maximum of 1169kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.