verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X50-30

The AirTAC SEJ Adjustable Cylinder SEJ125X50-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø125mm unit covers an effective stroke of 20–50mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke50 mm
  • Adjust window30 mm
  • Effective stroke20–50 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$275.87 $283.37Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X50-30

The AirTAC SEJ125X50-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable retract window. A stop screw on the back rod lets you dial the effective stroke down from 50 mm to a 20 mm minimum, perfect for fine-tuning the end position on the machine without swapping hardware. Because a rod exits both ends, the annular area is identical in both directions, yielding an equal force of 5734 N each way at 0.5 MPa.

This 125 mm bore unit runs at 30-500 mm/s and uses adjustable air cushions at both ends to decelerate heavy loads near the stroke extremes. It features a PT1/2 port, a 32 mm rod with an M27x2 thread, and an extruded aluminum barrel with no external tie rods. Note that this specific SKU lacks a magnet, so it will not support CMSE or DMSE position sensors.

Airtac SEJ Adjustable Cylinder SEJ125X50-30 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X50-30
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke50 mm
Adjustment window30 mm (20–50 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X50-30

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×50Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X50-30 Is Used

precision_manufacturing

Press Stroke Tuning

Dial in the 20-50 mm effective stroke on a metal stamping press to set precise upper-die clearance, leveraging the 5734 N both-way force to lift the heavy tooling.

swap_horiz

Packaging Changeover

Adjust the retract stop to accommodate different box heights on a packaging line, using the 30 mm window to rapidly reconfigure the 1169 kgf maximum clamping position.

factory

Injection Mold Ejection

Fine-tune the ejection reach on an injection molding machine, setting the exact push-back depth while the double-rod design ensures equal 8028 N ejection force at 0.7 MPa.

Is the Airtac SEJ Adjustable Cylinder SEJ125X50-30 the Right Cylinder?

Verify the 30 mm adjustment window covers your required end-position range; this model dials the retract stroke from 20 mm up to 50 mm. If you need less force, the adjacent smaller 100 mm bore provides 3681 N each way at 0.5 MPa; if you need more, the 125 mm is the largest standard size, offering 8028 N at 0.7 MPa. If the exact stroke is fixed and known, a standard SED double-rod cylinder is sufficient. Remember that the adjustable stop screw and air cushions only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, specify a BSED or an external rod lock. Ensure your ISO 15552 replacement matches the 50 mm stroke, 30 mm window, PT1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X50-30 FAQ

A stop screw on the rear rod mechanically shortens the retract stroke over a 30 mm window. You can dial the effective stroke from 20 mm up to the nominal 50 mm, then lock it in place for precise commissioning.

Because it is a double-rod cylinder, force is equal in both directions. It provides 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X50-30

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X50-30 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.