verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X50-30S

The AirTAC SEJ Adjustable Cylinder SEJ125X50-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø125mm unit covers an effective stroke of 20–50mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke50 mm
  • Adjust window30 mm
  • Effective stroke20–50 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$281.92 $289.42Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X50-30S

The AirTAC SEJ125X50-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window, yielding an effective stroke range of 20-50mm. A rod exits both ends, ensuring the annulus area remains identical in both directions. This provides an equal force of 5734 N each way at 0.5 MPa, preventing lopspeed retraction. An integrated -S magnet enables position tracking via CMSE reed or DMSE electronic sensors.

You dial in the exact retract end-position via a mechanical stop screw on the back rod, then lock it. This mechanism allows you to fine-tune the stroke directly on the machine without swapping hardware. The extruded aluminum barrel omits external tie rods, and field-adjustable air cushions at both ends decelerate the 32mm rod near stroke ends to absorb high kinetic energy.

Airtac SEJ Adjustable Cylinder SEJ125X50-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X50-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke50 mm
Adjustment window30 mm (20–50 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X50-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×50Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X50-30S Is Used

precision_manufacturing

Press Die Fine-Tuning

Dial the 20-50mm retract stop to precisely set die height during stamping press commissioning, utilizing the 5734 N both-way force to form heavy gauge parts.

straighten

Heavy Weldment Clamping

Adjust the stroke to clamp variable-thickness steel weldments without repositioning fixtures, taking advantage of the equal push and pull forces.

settings

Large Valve Stop Calibration

Set the exact mechanical end for large process valve actuators during initial machine setup, locking the back-rod stop screw at the required 20-50mm position.

Is the Airtac SEJ Adjustable Cylinder SEJ125X50-30S the Right Cylinder?

Confirm the 30mm adjustment window covers your required positioning range. If your process needs less force, the adjacent SEJ100 bore provides 3681 N at 0.5 MPa both ways. Stepping up is not an option as 125mm is the largest available SEJ bore, delivering 8028 N at 0.7 MPa. If your end-position never changes, a fixed-stroke SED cylinder is sufficient. The adjustable air cushion decelerates the load but does not hold position on air loss; for fail-safe holding, specify an external rod lock. Ensure your ISO 15552 replacement matches the PT1/2 port, M27x2 thread, and 50mm nominal stroke.

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X50-30S FAQ

The 30mm adjustment window lets you mechanically dial the retract stroke from 20mm up to 50mm. You set the exact end-position via the back-rod stop screw and lock it in place.

Because the rod exits both ends, force is equal in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X50-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X50-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.