verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X50-30SN

The AirTAC SEJ Adjustable Cylinder SEJ125X50-30SN is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø125mm unit covers an effective stroke of 20–50mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke50 mm
  • Adjust window30 mm
  • Effective stroke20–50 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$281.92 $289.42Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X50-30SN

The AirTAC SEJ125X50-30SN is a double-acting, double-rod ISO 15552 profile cylinder delivering equal force in both directions. The retract stroke is mechanically adjustable via a back-rod stop screw over a 30 mm window, providing an effective stroke range of 20 to 50 mm.

This NBR-sealed unit features a Ø32 mm rod with an M27x2 thread and a PT1/2 port. The integrated magnet supports CMSE reed and DMSE electronic sensors for position feedback. Adjustable air cushions at both ends decelerate the heavy 125 mm piston smoothly across its 30-500 mm/s speed range.

Airtac SEJ Adjustable Cylinder SEJ125X50-30SN Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X50-30SN
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke50 mm
Adjustment window30 mm (20–50 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X50-30SN

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×50Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X50-30SN Is Used

precision_manufacturing

Press Stroke Calibration

Dial in the exact 20-50 mm clamping depth on heavy stamping presses using the 30 mm stop screw, leveraging 5734 N of both-way force to secure parts.

swap_horiz

Variable-Height Machining Stops

Adjust the retract end on the fly to accommodate different raw material heights on a machining line, using the equal-force double rod to maintain rigid positioning.

factory

Heavy Fixture Changeover

Fine-tune the actuation distance during production line changeovers without swapping hardware, relying on the 8028 N available at 0.7 MPa to shift heavy jigs.

Is the Airtac SEJ Adjustable Cylinder SEJ125X50-30SN the Right Cylinder?

Verify the 30 mm adjustment window covers your required end-position range. If 5734 N at 0.5 MPa is excessive, step down to the 80 mm bore providing 2268 N both ways. If you need more power, there is no larger standard SEJ bore. For fixed-position tasks without fine-tuning, a standard SED double-rod cylinder suffices. Remember that the stop screw and air cushions only set the mechanical end and decelerate; they do not hold position on air loss. For fail-safe holding, use an external rod lock. This ISO 15552 dimensionally interchangeable cylinder mounts via Basic, FA, LB, TC, FTC, TCM1, or TCM2.

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X50-30SN FAQ

The retract stroke is adjustable via a stop screw on the back rod over a 30 mm window. For a nominal 50 mm stroke, the effective stroke range is 20 to 50 mm. You lock the screw after setting the exact end position.

As a double-rod cylinder, force is equal both ways: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa. It is dimensionally interchangeable per ISO 15552 / VDMA 24562.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X50-30SN

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X50-30SN and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.