verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X50-40S

The AirTAC SEJ Adjustable Cylinder SEJ125X50-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø125mm unit covers an effective stroke of 10–50mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke50 mm
  • Adjust window40 mm
  • Effective stroke10–50 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$281.92 $289.42Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X50-40S

The AirTAC SEJ125X50-40S is a double-acting, double-rod ISO 15552 profile cylinder with a 40 mm adjustable stroke window, yielding an effective retract range of 10 to 50 mm. A rod exits both ends, generating equal force in both directions at about 5734 N each way at 0.5 MPa. The integrated -S magnet enables position detection with CMSE reed or DMSE electronic sensors.

You dial in the exact end position using a mechanical stop screw on the rear rod, then lock it down. This 125 mm bore uses a PT1/2 port, a Ø32 mm rod with an M27x2 thread, and features field-adjustable air cushions at both ends to tame high kinetic energy. The extruded aluminum barrel ensures ISO 15552 dimensional interchangeability without external tie rods.

Airtac SEJ Adjustable Cylinder SEJ125X50-40S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X50-40S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke50 mm
Adjustment window40 mm (10–50 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X50-40S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×50Nominal stroke length in mm.
-40Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X50-40S Is Used

precision_manufacturing

Press Die Gap Setup

Dial the 10 to 50 mm retract window to match varying die heights on a 125 mm press. The 5734 N both-way force securely clamps heavy tooling without needing hardware swaps.

swap_horiz

Variable Part Ejection

Adjust the rear stop screw on the fly to change ejection distance for different castings.

factory

Heavy Pallet Changeover

Fine-tune the stopping position for different pallet widths during machine changeover. The Ø32 mm rod and adjustable cushion absorb the kinetic energy of heavy 125 mm loads.

Is the Airtac SEJ Adjustable Cylinder SEJ125X50-40S the Right Cylinder?

Verify the 40 mm adjustment window covers your positioning range. If you need less force, the 100 mm bore provides 3681 N at 0.5 MPa both ways; if you need more, step up to this 125 mm bore delivering 5734 N. A fixed-stroke SED is sufficient if your machine never requires end-position changes. For any fail-safe holding during air loss, add an external rod lock, as the cushion and stop screw only set the mechanical end and decelerate near stroke end. Confirm your ISO 15552 replacement matches the 50 mm stroke, 40 mm window, PT1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (40mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 40mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X50-40S FAQ

A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 40 mm. For a 50 mm nominal stroke, the effective retract range is 10 to 50 mm. You set the exact end position required and lock the screw.

Because it is a double-rod cylinder, the force is equal in both directions. It outputs 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and reaches a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X50-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X50-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.