
The AirTAC SEJ Adjustable Cylinder SEJ125X50-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø125mm unit covers an effective stroke of 0–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X50-50S is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable stroke window. A stop screw on the rear rod lets you dial the retract end from 0 to 50 mm, providing exact end-position tuning without changing hardware. Because the rod exits both ends, the annulus area is identical in both directions, yielding equal force of 5734 N each way at 0.5 MPa.
This 125 mm bore unit runs at 30-500 mm/s and includes a magnet for position sensing. It features field-adjustable air cushions at both ends to decelerate heavy loads near stroke end, and uses a PT1/2 port with a robust Ø32 mm rod.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X50-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 50 mm (0–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 0-50 mm retract window to set precise bottoming force on a 5734 N stamping press, allowing exact depth tuning during job changeovers.
Use the equal both-way force to clamp thick steel plates securely, adjusting the mechanical stop to accommodate varying material thicknesses without retooling.
Employ the rear rod stop screw to set a precise 25 mm intermediate stop for heavy pallet lifting, fine-tuning the exact lift height on the machine floor.
Verify the 50 mm adjustment window covers your required positioning range. If you need less force, stepping down to the 100 mm bore provides 3681 N both ways at 0.5 MPa; stepping up is not available as 125 mm is the largest standard SEJ size. If the stroke never needs on-machine fine-tuning, a fixed-stroke SED cylinder is a simpler choice.
For any fail-safe load holding on air loss, note that the air cushion and stop screw only set the mechanical end and decelerate the piston, they do not lock the rod. You will need an external rod lock or BSED variant. When replacing an ISO 15552 unit, match the 125 mm bore, 50 mm stroke, 50 mm window, PT1/2 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A mechanical stop screw on the back rod allows you to shorten the retract stroke by up to 50 mm. The effective stroke range is 0 to 50 mm, which is ideal for fine-tuning an end position on the machine without swapping out the cylinder.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.