
The AirTAC SEJ Adjustable Cylinder SEJ125X60-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø125mm unit covers an effective stroke of 30–60mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X60-30S is a double-acting, double-rod profile cylinder built to ISO 15552 dimensional standards. A rod exits both ends, yielding identical annulus areas so output force stays equal in extend and retract. You get 5734 N each way at 0.5 MPa. The rear rod features a mechanical stop screw that lets you dial the retract stroke up to 30 mm shorter, providing an effective stroke range of 30 to 60 mm without swapping hardware.
This unit includes a magnet for position sensing and operates at 30-500 mm/s. It uses a PT1/2 port, a Ø32 mm rod with an M27x2 thread, and field-adjustable air cushions at both ends. The extruded aluminum barrel omits external tie rods, and the cushioning decelerates the load near stroke end rather than acting as a mechanical lock.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X60-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 60 mm |
| Adjustment window | 30 mm (30–60 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×60 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30 mm retract window to precisely set the bottoming force on a 125 mm forming press, leveraging the 5734 N both-way output to strike heavy parts accurately.
Adjust the effective stroke between 30 and 60 mm to accommodate varying pallet heights on a transfer line, using the equal double-rod force to lift heavy fixtures smoothly.
Fine-tune the extraction depth of core pins from dense castings, utilizing the 8028 N retract force at 0.7 MPa to pull parts free without repositioning the cylinder body.
Verify the 30 mm adjustment window covers your end-position tolerance for the 60 mm nominal stroke. If you need less force, the neighboring bore down is 100 mm, providing 3681 N both ways at 0.5 MPa. If you need more thrust, this 125 mm bore is the largest standard size, delivering 8028 N at 0.7 MPa and a maximum 1169 kgf at 1.0 MPa. If your machine never requires stroke changes, a fixed-stroke SED cylinder provides the same double-rod output more simply.
For ISO 15552 replacement matching, confirm the 60 mm stroke, 30 mm window, PT1/2 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. The included -S magnet supports CMSE reed and DMSE electronic sensors. Remember that a plain SEJ does not hold position on air loss; the adjustable stop screw sets the mechanical end but is not a fail-safe rod lock.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke by up to 30 mm. This gives an effective stroke range of 30 to 60 mm, allowing you to fine-tune the end position on the machine and lock it in place without changing cylinder hardware.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.