verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X800-100S

The AirTAC SEJ Adjustable Cylinder SEJ125X800-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø125mm unit covers an effective stroke of 700–800mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke800 mm
  • Adjust window100 mm
  • Effective stroke700–800 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$655.07 $662.57Save 1% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X800-100S

The AirTAC SEJ125X800-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas and an equal drive force of 5734 N each way at 0.5 MPa. You can dial the retract stroke from 700 mm up to the 800 mm nominal length, perfect for setting a precise mechanical end position on the machine without machining custom hardware.

Because the rear rod carries the stop screw mechanism, the overall length is longer than a fixed-stroke SED. The extruded aluminum barrel omits external tie rods, and an integrated magnet enables position sensing with CMSE reed or DMSE electronic switches. Field-adjustable air cushions at both ends decelerate the heavy 32 mm rod over 40 mm, but this mechanical stop is not a lock; the cylinder will not hold position on air loss.

Airtac SEJ Adjustable Cylinder SEJ125X800-100S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X800-100S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke800 mm
Adjustment window100 mm (700–800 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X800-100S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×800Nominal stroke length in mm.
-100Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X800-100S Is Used

factory

Heavy Press Changeover

Dial in the 700-800 mm retract end to switch a 125 mm bore press between different heavy-gauge metal panel heights, using the full 5734 N both-way force without swapping hardware.

precision_manufacturing

Large Door Sealing

Fine-tune the 100 mm stop window during commissioning to apply exact clamping force on oversized industrial enclosure doors, ensuring a consistent seal across the 800 mm travel.

settings

Extrusion Trial Positioning

Adjust the mechanical end during prototype extrusion line setup to find the optimal ejection point, locking the back-rod stop screw once the 8028 N @0.7 MPa stroke hits the target.

Is the Airtac SEJ Adjustable Cylinder SEJ125X800-100S the Right Cylinder?

Verify the 100 mm adjustment window covers your required end-position range. If 5734 N at 0.5 MPa is excessive, the next bore down is 100 mm, providing 3681 N both ways; if you need more power, there is no larger SEJ bore, so consider twin cylinders or external fluid power. For fixed-position applications without changeover needs, a standard SED cylinder provides the same equal-force dynamics in a shorter footprint. For fail-safe load holding on this 800 mm stroke, add an external rod lock or BSED unit, as the adjustable cushion only decelerates near stroke end and does not brake.

When replacing an ISO 15552 cylinder, match the 125 mm bore, 800 mm nominal stroke, PT1/2 port, and M27x2 rod thread. At 800 mm, side loading is a major risk; ensure external guides support the load to prevent rod binding and premature seal wear. The available mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (100mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 100mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X800-100S FAQ

The 100 mm adjustment window allows you to mechanically dial the retract stroke down from the nominal 800 mm to a minimum effective stroke of 700 mm. You set the exact end position via the back-rod stop screw and lock it in place.

Because the rod exits both ends, the force is identical in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X800-100S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X800-100S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.