verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X800-20S

The AirTAC SEJ Adjustable Cylinder SEJ125X800-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø125mm unit covers an effective stroke of 780–800mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke800 mm
  • Adjust window20 mm
  • Effective stroke780–800 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$655.07 $662.57Save 1% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X800-20S

The AirTAC SEJ125X800-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window, yielding an effective stroke range of 780-800mm. A rod exits both ends, ensuring the annulus area is identical in both directions. This delivers an equal force of 5734 N each way at 0.5 MPa, preventing differential thrust.

You dial in the retract end position via a mechanical stop screw on the back rod, locking it after setting the exact 780-800mm travel. The -S magnet supports CMSE reed and DMSE electronic sensors for precise end-of-travel detection. With an 800mm stroke, external guides are highly recommended to manage side loads and prevent rod binding over this long extension.

Airtac SEJ Adjustable Cylinder SEJ125X800-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X800-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke800 mm
Adjustment window20 mm (780–800 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X800-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×800Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X800-20S Is Used

precision_manufacturing

Heavy Press Tonnage Dial-In

Fine-tune the exact 780-800mm end-of-stroke on a multi-ton metal stamping press, using the 5734 N both-way force to consistently seat heavy dies during commissioning.

conveyor_belt

Pallet Divert Stop Calibration

Adjust the retract stop on a heavy-logistics conveyor to precisely catch varying pallet heights, relying on the equal push and pull forces to handle 1169 kgf max loads smoothly.

factory

Automated Welder Electrode Gap

Set the exact 20mm mechanical stroke window on a robotic spot welder to accommodate electrode wear, using the rear rod to mount a cam for DMSE sensor feedback.

Is the Airtac SEJ Adjustable Cylinder SEJ125X800-20S the Right Cylinder?

Confirm the 20mm adjustment window covers your required end-position variance; if you need more travel dial-in, consider a larger adjustment option. For sizing both ways: stepping down to bore 100 yields 3681 N at 0.5 MPa, while there is no larger bore in this series, so 125mm provides the maximum 8028 N at 0.7 MPa. If you require a fixed 800mm stroke without fine-tuning, the SED double-rod cylinder is a simpler choice.

This plain SEJ cylinder does not hold position on air loss; the adjustable air cushion and stop screw only set the mechanical end and decelerate near stroke end. For fail-safe holding, use an external rod lock or BSED. To replace an ISO 15552 unit, match the 125mm bore, 800mm nominal stroke, PT1/2 port, and your specific mounting (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X800-20S FAQ

The retract end can be dialed in over a 20mm window, giving an effective stroke range of 780mm to 800mm. You set the exact end position via a stop screw on the back rod and lock it in place.

Because the rod exits both ends, force is identical in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X800-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X800-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.