
The AirTAC SEJ Adjustable Cylinder SEJ32X160-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø32mm unit covers an effective stroke of 60–160mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X160-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window, yielding an effective stroke range of 60-160mm. A rod exits both ends, ensuring identical annulus area so the output force is equal in both directions. You get 345N each way at 0.5MPa, and 483N at 0.7MPa. The -S magnet option enables position detection with CMSE reed or DMSE electronic sensors.
A mechanical stop screw on the back rod allows you to dial in the retract end-position precisely during machine commissioning. You must lock the stop screw after setting your target dimension. The extruded aluminum barrel contains no external tie rods, and field-adjustable air cushions at both ends decelerate the 12mm rod near stroke completion without acting as a fail-safe lock.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X160-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 160 mm |
| Adjustment window | 100 mm (60–160 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Adjust the mechanical end-stop to accommodate different part heights on a conveyor line without swapping hardware, relying on the equal both-way force for stable handling.
Use the adjustable stroke to test various grip and release distances on a prototype pick-and-place unit, tracking positions precisely with the -S magnet and DMSE sensors.
Confirm the 100mm adjustment window covers your variable-stop range. If you need less fine-tune capacity, a fixed-stroke SED saves cost. For sizing, stepping down is not an option at 32mm, but stepping up to the 40mm bore provides 528N at 0.5MPa if your load exceeds 345N. Because the stroke is 160mm, ensure your external guides handle side loads to protect the 12mm rod. For fail-safe position holding on air loss, add an external rod lock or choose a BSED, as the cushion only decelerates. Match ISO 15552 replacements by checking the 60-160mm effective range, PT1/8 port, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
The -100 code means the retract end can be dialed in over a 100mm window. The effective stroke range is 60-160mm. You set the exact end-position with a stop screw on the back rod, then lock it in place.
Because it is a double-rod cylinder, force is equal in both directions: 345N at 0.5MPa, 483N at 0.7MPa, and a maximum of 70kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.