
The AirTAC SEJ Adjustable Cylinder SEJ32X160-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø32mm unit covers an effective stroke of 150–160mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X160-10S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so the drive force is equal in both directions at 345 N (0.5 MPa). The retract stroke is mechanically adjustable via a back-rod stop screw over a 10 mm window, giving an effective stroke range of 150-160 mm for precision end-position tuning.
This extruded aluminum profile cylinder features field-adjustable air cushions at both ends and includes a magnet (-S) for CMSE reed or DMSE electronic sensors. It uses an M10x1.25 rod-end thread and PT1/8 ports.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X160-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 160 mm |
| Adjustment window | 10 mm (150–160 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 10 mm retract window during commissioning to match a pick-and-place jaw drop precisely, using the 345 N both-way force to grip without overshooting.
Adapt a packaging machine to different carton sizes by adjusting the effective stroke from 150 to 160 mm, leveraging equal push and pull forces for stable changeover.
Use the back-rod stop screw to test multiple retract end positions on a test rig, locking the 12 mm rod exactly where the 483 N (0.7 MPa) force meets the stop.
Confirm the 10 mm adjustment window covers your positioning range. If you need less force, the next bore down is not available in this ISO 15552 range. If you need more force, step up to the 40 mm bore, which provides 528 N both ways at 0.5 MPa. If your end position never varies, a fixed-stroke SED cylinder is sufficient.
The adjustable air cushion decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, use an external rod lock. This SEJ32X160-10S is dimensionally interchangeable per ISO 15552—match the 32 mm bore, 160 mm stroke, PT1/8 port, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2) for direct replacement. At 160 mm stroke, ensure external guides support side loads.
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
The retract stroke is adjustable up to 10 mm via a stop screw on the back rod. The effective stroke range is 150 to 160 mm. You set the exact end position on the machine and lock it in.
Because the rod exits both ends, force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.