
The AirTAC SEJ Adjustable Cylinder SEJ32X160-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø32mm unit covers an effective stroke of 140–160mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X160-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions, yielding an equal force of 345 N each way at 0.5 MPa. You can dial the retract end from 140 mm up to 160 mm to fine-tune the machine end position without swapping hardware.
This extruded aluminum barrel design includes a magnet for CMSE reed or DMSE electronic sensors. The field-adjustable air cushion at both ends decelerates the 12 mm rod near stroke end, and a rear stop screw mechanically locks your setting after commissioning.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X160-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 160 mm |
| Adjustment window | 20 mm (140–160 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 140-160 mm retract stop to precisely set the drill depth on circuit board routing machines, utilizing the 345 N both-way force.
Adjust the end position on the fly to handle varying carton sizes without changing cylinder mounts, locking the 20 mm window via the back rod.
Fine-tune the exact fluid dispense height during R&D trials, relying on the equal extend and retract forces for consistent metering.
Verify the 20 mm adjustment window covers your positioning range. If you need less force, stepping down is not an option as 32 mm is the smallest bore, but stepping up to the 40 mm bore provides 528 N both ways at 0.5 MPa. If the exact end position is fixed and never changes, a standard SED fixed-stroke cylinder is sufficient.
For ISO 15552 replacement matching, confirm the 160 mm stroke, 20 mm window, PT1/8 port, and magnet option. Since the 160 mm stroke exceeds 300 mm, ensure external guides are used to prevent side-load damage to the M10x1.25 rod threads. Note that the air cushion only decelerates the load; it will not hold position on air loss.
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 20 mm. The effective stroke range is 140 mm to 160 mm, which you lock in place after setting the exact machine end position.
Because the rod exits both ends, force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.