verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X400-50S

The AirTAC SEJ Adjustable Cylinder SEJ32X400-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø32mm unit covers an effective stroke of 350–400mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke400 mm
  • Adjust window50 mm
  • Effective stroke350–400 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$103.05 $110.55Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X400-50S

The AirTAC SEJ32X400-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. By turning the stop screw on the rear rod, you can dial the retract end position to anywhere in an effective 350 to 400 mm range. This allows precise in-machine commissioning without swapping hardware.

The extruded aluminum barrel contains no external tie rods, ensuring a clean profile that is dimensionally interchangeable per ISO 15552. This specific unit includes a magnet (-S) for position sensing and uses a PT1/8 port. Field-adjustable air cushions at both ends provide reliable deceleration near the stroke extremes, though they do not function as a mechanical lock.

Airtac SEJ Adjustable Cylinder SEJ32X400-50S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X400-50S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke400 mm
Adjustment window50 mm (350–400 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X400-50S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×400Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X400-50S Is Used

tune

Pick-and-Place End Tuning

Dial in the exact 350-400 mm retract stop during robotic pick-and-place commissioning to match varying part heights without re-mounting hardware.

swap_horiz

Conveyor Changeover

Adjust the stroke on a packaging line conveyor diverter to accommodate different carton widths on the fly, utilizing the equal 345 N both-way force.

science

Lab Test Positioning

Set precise mechanical endpoints for repetitive material testing rigs, using the 50 mm window to find the exact contact point before locking the screw.

Is the Airtac SEJ Adjustable Cylinder SEJ32X400-50S the Right Cylinder?

Verify that the 50 mm adjustment window covers your required end-position variance. If you need less fine-tuning range, a fixed-stroke SED double-rod cylinder is sufficient. For sizing, stepping down to a 32 mm bore is your current size, but if you need more force, the next bore up is 40 mm, which provides 528 N both ways at 0.5 MPa. Conversely, if you can reduce payload, you could drop to a smaller bore. When matching an ISO 15552 replacement, confirm the 400 mm stroke, 50 mm window, PT1/8 port, and magnet option. Because the 400 mm stroke is 12.5 times the 32 mm bore, you must use external guides to prevent side-loading from damaging the rod seals.

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X400-50S FAQ

A stop screw on the rear rod mechanically shortens the retract stroke over a 50 mm window. You can set the effective stroke anywhere from 350 mm up to the full 400 mm, then lock the screw in place.

Because the rod exits both ends, force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X400-50S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X400-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.