verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X1400-50S

The AirTAC SEJ Adjustable Cylinder SEJ63X1400-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø63mm unit covers an effective stroke of 1350–1400mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke1400 mm
  • Adjust window50 mm
  • Effective stroke1350–1400 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$392.65 $400.15Save 1% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X1400-50S

The AirTAC SEJ63X1400-50S is a double-acting, double-rod ISO 15552 profile cylinder with a 1400 mm nominal stroke and a 50 mm adjustable stroke window. A stop screw on the rear rod lets you dial the retract end position, yielding an effective stroke range of 1350-1400 mm. Because a rod exits both ends, the annulus area is identical in both directions, delivering an equal force of 1402 N each way at 0.5 MPa.

This 63 mm bore unit features a PT3/8 port, a Ø20 mm rod with an M16x1.5 thread, and an integrated -S magnet for position sensing. Adjustable air cushions at both ends decelerate the load near stroke end, while the extruded aluminum barrel ensures dimensionally interchangeable ISO 15552 mounting without external tie rods.

Airtac SEJ Adjustable Cylinder SEJ63X1400-50S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X1400-50S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke1400 mm
Adjustment window50 mm (1350–1400 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X1400-50S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×1400Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X1400-50S Is Used

precision_manufacturing

Automated Welding Line

Dial the 50 mm retract window to perfectly align welding fixtures on a 1400 mm stroke, utilizing the equal 1962 N both-way force at 0.7 MPa to handle heavy frames.

swap_horiz

Packaging Changeover

Quickly adjust the end stop to accommodate varying pallet heights during format changeovers, using the 1350-1400 mm effective range without swapping hardware.

conveyor_belt

Long-Stroke Diverting

Deploys a 1400 mm diverter arm on a conveyor, relying on the adjustable air cushion to safely decelerate the load and the -S magnet to confirm full extension.

Is the Airtac SEJ Adjustable Cylinder SEJ63X1400-50S the Right Cylinder?

Confirm this 50 mm adjustment window covers your fine-tuning range; lock the rear stop screw after setting your exact end position. If you need less force, the neighboring 50 mm bore provides 825 N both ways at 0.5 MPa. If your application requires more thrust, step up to the 80 mm bore for 2268 N both ways at 0.5 MPa. If you do not need variable stops, a fixed-stroke SED handles the task more compactly.

At 1400 mm stroke, external guides are strongly recommended to prevent rod side-loading and protect the seal package. The standard -S magnet supports CMSE reed and DMSE electronic sensors for precise position feedback. Note that the air cushion and stop screw decelerate and set the mechanical end but do not hold position on air loss; for fail-safe holding, specify an external rod lock.

AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X1400-50S FAQ

A stop screw on the back rod mechanically shortens the retract stroke over a 50 mm window. For this SEJ63X1400-50S model, the effective stroke range is 1350-1400 mm. You dial the exact end position during commissioning and lock the screw in place.

Because it is a double-rod cylinder, force is identical in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X1400-50S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X1400-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.