
The AirTAC SEJ Adjustable Cylinder SEJ80X120-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø80mm unit covers an effective stroke of 70–120mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X120-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring an adjustable stroke. A rod exits both ends, ensuring the annulus area remains identical in both directions. This provides an equal force of 2268 N each way at 0.5 MPa, preventing speed mismatches during retraction.
The 50 mm adjustment window lets you mechanically dial the retract end from 70 mm up to 120 mm. A stop screw on the back rod sets the precise end position, which you then lock in place. This extruded aluminum barrel design includes a magnet for CMSE or DMSE sensors and omits external tie rods for a clean profile.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X120-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 120 mm |
| Adjustment window | 50 mm (70–120 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×120 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 2268 N both ways, dial the 50 mm window to perfectly seat bearings without reconfiguring the press line.
Adjust the retract from 70 to 120 mm to grip varying pallet layers, leveraging equal push and pull forces.
Fine-tune the mechanical stop on the fly to deflect packages of different depths accurately.
This 80 mm bore delivers 2268 N both ways at 0.5 MPa. If your application needs less force, step down to the 63 mm bore (1402 N); if you need more, step up to the 100 mm bore (3681 N). If your end position never changes, a fixed-stroke SED cylinder is sufficient.
For fail-safe load holding on air loss, note that the adjustable air cushion and mechanical stop screw only decelerate and set the end position; they are not a brake. Use an external rod lock. When replacing an ISO 15552 unit, match the 120 mm stroke, 50 mm window, PT3/8 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The 50 mm window lets you mechanically dial the retract stroke from 70 mm up to the nominal 120 mm. You set the exact end position with a back-rod stop screw and lock it.
Because the rod exits both ends, force is equal in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.