verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ80X125-10S

The AirTAC SEJ Adjustable Cylinder SEJ80X125-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø80mm unit covers an effective stroke of 115–125mm without changing cylinders. Force is equal in both directions.

  • BoreØ80 mm
  • Nominal stroke125 mm
  • Adjust window10 mm
  • Effective stroke115–125 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$164.00 $171.50Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ80 stroke, mounting and version on one page All SEJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ80X125-10S

The AirTAC SEJ80X125-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window, yielding an effective stroke range of 115-125mm. A rod exits both ends, ensuring the annular area remains identical in both directions. This provides an equal output force of 2268N each way at 0.5MPa, preventing the speed and force discrepancies found in single-rod variants.

The retract position is set via a mechanical stop screw on the back rod, allowing precise end-position tuning directly on the machine without changing hardware. You must lock the screw after setting your position. This bore 80mm unit includes a magnet for CMSE or DMSE sensors, uses a PT3/8 port, and relies on field-adjustable air cushions at both ends to decelerate the load near stroke end.

Airtac SEJ Adjustable Cylinder SEJ80X125-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ80X125-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ80 mm
Nominal stroke125 mm
Adjustment window10 mm (115–125 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressureForce (both directions)
0.5 MPa2268 N
0.7 MPa3175 N
Max (@1.0 MPa)463 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ80X125-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
80Bore size in mm.
×125Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ80X125-10S Is Used

precision_manufacturing

Press Stroke Tuning

Dial in the exact 115-125mm clamping position on an assembly press using the back-rod stop screw, leveraging 3175N of equal both-way force at 0.7MPa.

settings

Variable Stop Commissioning

Fine-tune the retract end-position during machine commissioning without swapping hardware, locking the 10mm window precisely against a mechanical stop.

Is the Airtac SEJ Adjustable Cylinder SEJ80X125-10S the Right Cylinder?

This 80mm bore delivers 3175N both ways at 0.7MPa. If your application needs less force, the 63mm bore provides 1962N at 0.7MPa; if you need more, stepping up to the 100mm bore yields 5153N at 0.7MPa. The 10mm adjustment window is ideal for dialing in a precise stop during commissioning. If your stroke never varies, a fixed-stroke SED cylinder is sufficient.

For ISO 15552 replacement matching, verify the 125mm stroke, 10mm window, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the adjustable cushion only decelerates the load; it is not a lock. A plain SEJ will not hold position on air loss, so for fail-safe holding, use a BSED or an external rod lock.

AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ80X125-10S FAQ

A stop screw on the rear rod mechanically shortens the retract stroke over a 10mm window, giving an effective stroke range of 115-125mm. You dial in the exact end position and lock the screw, meaning one cylinder covers a stroke range without hardware changes.

Because it is a double-rod cylinder, force is equal both ways: 2268N at 0.5MPa, 3175N at 0.7MPa, and a maximum of 463kgf at 1.0MPa. It is dimensionally interchangeable per ISO 15552 and uses a PT3/8 port.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ80X125-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ80X125-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.