
The AirTAC SEJ Adjustable Cylinder SEJ80X125-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø80mm unit covers an effective stroke of 95–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X125-30S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas and an equal drive force of 2268 N each way at 0.5 MPa. The back-rod stop screw lets you dial the retract end over a 30 mm window, providing an effective stroke range of 95-125 mm.
This 80 mm bore unit features a PT3/8 port, a Ø25 mm rod with an M20x1.5 thread, and field-adjustable air cushions at both ends. The S suffix denotes an integrated magnet for position detection. The cushion decelerates the load near stroke end but does not lock the rod; use an external rod lock for fail-safe holding.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X125-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 30 mm (95–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 2268 N at 0.5 MPa, dial the 30 mm stop screw to perfectly seat a 125 mm press die during setup without swapping hardware.
Switch a packaging line to different carton heights by adjusting the retract end within the 95-125 mm window to meet the new mechanical stop.
Verify the 30 mm adjustment window covers your machine's fine-tuning range, giving a 95-125 mm effective stroke. For sizing both ways: the next bore down (63 mm) yields 1402 N at 0.5 MPa, while stepping up to 100 mm provides 3681 N. If your end position never changes, a fixed-stroke SED simplifies the assembly. When replacing an ISO 15552 cylinder, match the 125 mm stroke, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The SEJ80X125-30S has a 30 mm adjustment window via a stop screw on the rear rod. The effective retract stroke can be dialed from 95 mm up to the nominal 125 mm. Lock the screw after setting your end position.
Because it is a double-rod cylinder, the force is equal in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.