verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ80X125-50H

The AirTAC SEJ Adjustable Cylinder SEJ80X125-50H is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø80mm unit covers an effective stroke of 75–125mm without changing cylinders. Force is equal in both directions.

  • BoreØ80 mm
  • Nominal stroke125 mm
  • Adjust window50 mm
  • Effective stroke75–125 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$180.02 $187.52Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ80 stroke, mounting and version on one page All SEJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ80X125-50H

The AirTAC SEJ80X125-50H is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm mechanical stroke adjustment window, yielding an effective retract range of 75 to 125 mm. A rod exits both ends, meaning the annulus area is identical in both directions. This provides an equal drive force of 2268 N each way at 0.5 MPa, free from the unequal push/pull bias of single-rod units.

This specific configuration uses FKM (Viton) seals to operate in environments up to 150 C, well beyond the standard 70 C limit. The retract position is set via a stop screw on the back rod; you dial in the exact end point during commissioning and lock it in place. The extruded aluminum barrel has no external tie rods, and adjustable air cushions at both ends manage deceleration over the 36 mm cushion length.

Airtac SEJ Adjustable Cylinder SEJ80X125-50H Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ80X125-50H
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ80 mm
Nominal stroke125 mm
Adjustment window50 mm (75–125 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressureForce (both directions)
0.5 MPa2268 N
0.7 MPa3175 N
Max (@1.0 MPa)463 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ80X125-50H

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
80Bore size in mm.
×125Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ80X125-50H Is Used

precision_manufacturing

Hot-End Glass Forming

Pushes a 125 mm blank mold plunger with 2268 N at 0.5 MPa. The FKM seals withstand 150 C ambient heat, while the 50 mm window lets operators dial in the exact 75-125 mm mold closure depth.

swap_horiz

Variable-Height Pallet Stops

Acts as a back stop for pallets of varying heights. The double-rod design ensures equal 3175 N retract force at 0.7 MPa to hold the load, and the stop screw sets the exact flag position without swapping hardware.

tune

High-Temp Press Pin Setting

Drives a press pin near a 140 C curing oven. The 50 mm adjustment allows precise tuning of the pin penetration depth during commissioning, locking the back rod screw once the optimal 90 mm hit depth is found.

Is the Airtac SEJ Adjustable Cylinder SEJ80X125-50H the Right Cylinder?

Verify the 50 mm adjustment window covers your required positioning range, letting you fine-tune the 75 to 125 mm stroke precisely on the machine. If you need less force, the adjacent 63 mm bore provides 1402 N at 0.5 MPa; if you need more, stepping up to the 100 mm bore yields 3681 N both ways. If your end position never changes, a fixed-stroke SED avoids the adjustment mechanism entirely.

This SKU lacks the S magnet option, so it cannot host CMSE or DMSE position sensors without modification. Remember that the adjustable air cushion and back-rod stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, specify an external rod lock. Since the stroke is under 300 mm, side-load stress is minimal, but always guide the load externally to prevent binding on the 25 mm rods.

AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ80X125-50H FAQ

The 50 mm adjustment window allows you to mechanically shorten the retract stroke from the 125 mm nominal maximum down to 75 mm. You set the exact end position using the stop screw on the rear rod and lock it in place.

Because it is a double-rod cylinder, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa. The proof pressure is 1.5 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ80X125-50H

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ80X125-50H and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.