
The AirTAC SEJ Adjustable Cylinder SEJ80X125-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø80mm unit covers an effective stroke of 75–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X125-50S is a double-acting, double-rod ISO 15552 profile cylinder with a 50mm adjustable stroke window. A rod exits both ends, meaning the annular area is identical in both directions. This yields an equal force of 2268 N each way at 0.5 MPa, preventing speed and thrust mismatches between extend and retract. The effective stroke dials from 75mm up to 125mm using a stop screw on the back rod.
You lock the back-rod stop screw after finding the exact end position during machine commissioning. The extruded aluminum barrel carries no external tie rods, and the field-adjustable air cushion at both ends decelerates the 25mm rod near stroke end. The built-in -S magnet pairs directly with CMSE reed and DMSE electronic sensors for mid-stroke confirmation.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X125-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 50 mm (75–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 75-125mm retract stop during press setup, using the 2268N both-way force to clamp and release dies without repositioning hardware.
Fine-tune the gripper jaw travel during commissioning, locking the back-rod stop screw precisely where the 25mm rod meets the part.
The 50mm retract window is ideal for fine-tuning a stop or accommodating part height changeovers between 75 and 125mm. If you need less force, the 63mm bore provides 1402 N at 0.5 MPa; if you need more, the 100mm bore yields 3681 N at 0.5 MPa. A fixed-stroke SED is sufficient if your end position never varies. For an ISO 15552 replacement, match the 80mm bore, 125mm nominal stroke, PT3/8 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that the air cushion only decelerates near stroke end; a plain SEJ does not hold position on air loss, so use an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 50mm. The effective stroke range is 75-125mm. You dial in the exact end position and lock it, meaning one cylinder covers a range of stop distances without changing hardware.
Because a rod exits both ends, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.