
The AirTAC SEJ Adjustable Cylinder SEJ80X125-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø80mm unit covers an effective stroke of 50–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X125-75S is a double-acting, double-rod ISO 15552 profile cylinder with a 75 mm adjustable stroke window. A stop screw on the back rod lets you dial the retract end from 50 mm up to the full 125 mm, covering a wide positioning range without changing hardware. The extruded aluminum barrel has no external tie rods, ensuring clean ISO 15552 dimensional interchangeability.
Because a rod exits both ends, the annular area is identical in both directions. This gives an equal force of 2268 N each way at 0.5 MPa. The -S magnet enables position detection with CMSE reed or DMSE electronic sensors. Field-adjustable air cushions at both ends decelerate the load near stroke end, though this mechanism is not a fail-safe lock.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X125-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 75 mm (50–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50-125 mm retract window to test material compaction at varying heights, utilizing the 2268 N both-way force for consistent press strokes.
Adjust the mechanical stop screw to match new package sizes on a packaging line, locking the back rod after setting the exact end position.
Fine-tune the electrode approach distance during robotic welder commissioning, using the equal both-way force to maintain stable contact pressure.
Verify the 75 mm adjustment window covers your required end-position range. If you need less force, the adjacent 63 mm bore provides 1402 N both ways at 0.5 MPa; if you need more, step up to the 100 mm bore for 3681 N. A fixed-stroke SED is sufficient if you do not need to fine-tune the retract position on the machine. For direct ISO 15552 replacement, match the 125 mm stroke, 75 mm window, PT3/8 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that the air cushion and mechanical stop screw only set the end position and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The 75 mm adjustment window allows the effective retract stroke to be dialed in from 50 mm up to the nominal 125 mm. You set the exact end position using the stop screw on the back rod, then lock it in place.
Because the rod exits both ends, the force is identical in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.