
The AirTAC SEJ Adjustable Cylinder SEJ80X140-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø80mm unit covers an effective stroke of 90–140mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X140-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions, yielding an equal force of 2268 N each way at 0.5 MPa. You can dial the retract end from 90 mm up to the 140 mm nominal stroke.
A stop screw on the back rod lets you mechanically set the precise end position during machine commissioning without swapping hardware. The extruded aluminum barrel omits external tie rods, and the included -S magnet supports CMSE reed and DMSE electronic sensors for exact tracking.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X140-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 140 mm |
| Adjustment window | 50 mm (90–140 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×140 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 90-140 mm stroke to set precise upper-die clearance on a 200-ton press, utilizing the equal 3175 N both-way force to lift heavy tooling consistently.
Adjust the retract stop on a package sorting diverter to accommodate different carton lengths on the fly, matching the exact physical stop without reprogramming controls.
Fine-tune the end position during changeover between different pallet heights on an automated wrapper, using the 50 mm window to match the exact resting plane.
Confirm this 50 mm adjustment window covers your required positioning range. If you need less fine-tune capacity, the 63 mm bore delivers 1402 N both ways at 0.5 MPa, while stepping up to the 100 mm bore provides 3681 N. For applications requiring a fixed end stop without adjustment, the SED double-rod cylinder is a simpler alternative.
When replacing an ISO 15552 cylinder, match the 80 mm bore, 140 mm stroke, PT3/8 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the adjustable air cushion decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, use an external rod lock.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 50 mm. The effective stroke range is 90-140 mm. You lock the screw after setting the exact end position, which is ideal for fine-tuning during machine commissioning.
Because it is a double-rod cylinder, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.