
The AirTAC SEJ Adjustable Cylinder SEJ80X250-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø80mm unit covers an effective stroke of 150–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X250-100S is a double-acting, double-rod ISO 15552 profile cylinder. The -100S tail denotes a 100 mm retract adjustment window and an integrated magnet.
A stop screw on the back rod lets you dial the effective stroke down from 250 mm to a 150 mm minimum, perfect for fine-tuning a machine end position without swapping hardware. The extruded aluminum barrel omits external tie rods, and adjustable air cushions at both ends decelerate the 25 mm rod near stroke ends.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X250-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 100 mm (150–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm window to shift the 250 mm stroke for different pallet thicknesses, applying 2268 N of equal both-way force at 0.5 MPa to push loads securely.
Fine-tune the retract end position during commissioning to match a die stop precisely, locking the back-rod screw once the 3175 N @0.7 MPa force is centered.
Adjust the effective stroke down to 150 mm to position sheet metal guides, using the double-rod design to resist rotational torque during high-speed actuation.
This 80 mm bore delivers 2268 N both ways at 0.5 MPa. If your load is lighter, the 63 mm bore provides 1402 N; for heavier drives, the 100 mm bore offers 3681 N. The 100 mm adjustment window is ideal for changeovers between varying part heights.
For fixed-position tasks requiring no on-machine tuning, the SED fixed-stroke cylinder is sufficient. Remember that the adjustable cushion and stop screw decelerate and set the mechanical end but do not hold position on air loss; use an external rod lock for fail-safe holding. This PT3/8 ported unit is dimensionally interchangeable per ISO 15552.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The 100 mm adjustment window lets you mechanically dial the retract stroke from 150 mm up to the nominal 250 mm. You set the exact end position via a stop screw on the back rod and lock it in place.
Because the double-rod design yields equal annulus areas, force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.