
The AirTAC SEJ Adjustable Cylinder SEJ80X250-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø80mm unit covers an effective stroke of 200–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X250-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This provides an equal force of 2268 N each way at 0.5 MPa, preventing asymmetric thrust common in single-rod units.
You can dial the retract end-position up to 50 mm via a mechanical stop screw on the back rod, yielding an effective stroke range of 200-250 mm. This extruded aluminum profile cylinder includes a magnet for CMSE or DMSE sensors. It features field-adjustable air cushions at both ends to decelerate the load near stroke end, though it relies on external guides for side-load management.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X250-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 50 mm (200–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 200-250 mm retract stroke to perfectly match varying carton heights, applying 2268 N of equal both-way force to fold flaps cleanly without crushing the box.
Fine-tune the mechanical end position during machine commissioning, locking the back-rod stop screw precisely against a workpiece while leveraging 3175 N at 0.7 MPa.
Rapidly adjust the end-stop for changeovers between different part lengths on a machining center, using the 50 mm window to avoid swapping out the entire cylinder.
Confirm the 50 mm adjustment window covers your required positioning range, dialing the retract stroke between 200 and 250 mm before locking the stop screw. If you need less force, the adjacent 63 mm bore provides 1402 N at 0.5 MPa; if you need more, stepping up to the 100 mm bore yields 3681 N both ways at 0.5 MPa. If your end-position never changes, a fixed-stroke SED is sufficient. Remember, the air cushion and stop screw decelerate the load and set the mechanical end, but a plain SEJ does not hold position on air loss—use an external rod lock for fail-safe holding. For ISO 15552 replacement matching, verify the 250 mm stroke, 50 mm window, PT3/8 port, and M20x1.5 rod thread.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 50 mm window. You can dial the effective stroke anywhere from 200 mm up to 250 mm, then lock the screw in place for precise machine positioning.
Because the rod exits both ends, force is equal in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.