
The AirTAC SEJ Adjustable Cylinder SEJ80X275-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø80mm unit covers an effective stroke of 175–275mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X275-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 2268 N each way at 0.5 MPa. Because a rear stop screw mechanically shortens the retract stroke, you can dial the effective travel precisely from 175 mm up to the nominal 275 mm without changing hardware.
This extruded aluminum barrel design includes field-adjustable air cushions at both ends to manage deceleration near stroke completion. Equipped with a magnet (-S), it supports CMSE reed and DMSE electronic sensors for position feedback. The PT3/8 port and Ø25 mm rod provide robust pneumatic capacity for demanding changeover tasks.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X275-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 275 mm |
| Adjustment window | 100 mm (175–275 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×275 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 175-275 mm retract stop during press die setup, utilizing the 2268 N both-way force to clamp and release heavy stamping blanks with repeatable precision.
Fine-tune the end-of-stroke position during equipment commissioning to match a fixed mechanical stop, locking the rear screw once the optimal 175-275 mm travel is achieved.
Confirm the 100 mm adjustment window covers your required end-position range before ordering. If your application needs less force, the neighboring 63 mm bore provides 1402 N both ways at 0.5 MPa; if you require more power, step up to the 100 mm bore which delivers 3681 N both ways at 0.5 MPa. For fixed-retract applications without end-tuning, a standard SED cylinder is sufficient. Since the stroke is 275 mm, use external guides to handle side loads and prevent rod binding. To replace an ISO 15552 cylinder, match the 80 mm bore, 275 mm stroke, 100 mm window, PT3/8 port, and your mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the adjustable stop screw and air cushions decelerate motion but do not hold position on air loss; for fail-safe holding, use an external rod lock.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The 100 mm adjustment window allows you to mechanically dial the retract stroke from 175 mm up to the nominal 275 mm. You set the exact end position using the stop screw on the back rod, then lock it in place.
Because the rod exits both ends, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.