
The AirTAC SEJ Adjustable Cylinder SEJ80X300-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø80mm unit covers an effective stroke of 280–300mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X300-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20 mm adjustable retract stroke, yielding an effective travel range of 280-300 mm. A rod exits both ends, ensuring the annular area is identical in both directions. This delivers an equal output force of 2268 N each way at 0.5 MPa.
You dial in the precise end-position using a stop screw on the back rod, then lock it after setting. Because the stroke is 300 mm, support external guides to manage side loads. This -S variant includes a magnet for CMSE reed and DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X300-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 300 mm |
| Adjustment window | 20 mm (280–300 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×300 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 280-300 mm stroke to match part heights on a conveyor line, using the equal 2268 N both-way force to push items accurately without asymmetric drift.
Adjust the retract end-position on the back rod stop screw during machine setup, locking the 3175 N @0.7 MPa force precisely where a new tooling stop is needed.
Use the 300 mm travel and 20 mm window to test engagement depths on a prototype jig, relying on the equal double-rod force for stable test metrics.
Confirm the 20 mm adjustment window covers your required end-position tuning. If you need less force, the adjacent 63 mm bore provides 1402 N at 0.5 MPa; if you need more, the 100 mm bore yields 3681 N both ways at 0.5 MPa. If your travel never varies, a fixed-stroke SED saves space. For fail-safe holding on air loss, add an external rod lock. Match ISO 15552 replacements by verifying bore, stroke, window, PT3/8 port, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The retract end is adjustable over a 20 mm window, meaning the effective stroke can be dialed from 280 mm up to 300 mm and locked at the exact position required.
Because the rod exits both ends, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.