
The AirTAC SEJ Adjustable Cylinder SEJ80X300-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø80mm unit covers an effective stroke of 250–300mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X300-50S is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable retract stroke, yielding an effective travel range of 250 to 300 mm. A rod exits both ends, ensuring the annular area remains identical in both directions. This provides an equal drive force of 2268 N each way at 0.5 MPa, preventing speed asymmetry.
You dial in the exact end position using a mechanical stop screw on the back rod, then lock it in place—ideal for machine commissioning and matching stops precisely. The extruded aluminum barrel carries no external tie rods, and the unit includes field-adjustable air cushions at both ends to manage deceleration over the 36 mm cushion length. An -S magnet is built in for CMSE reed or DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X300-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 300 mm |
| Adjustment window | 50 mm (250–300 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×300 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50 mm retract window to precisely set punch depth on a mechanical press, utilizing the 2268 N both-way force to form sheet metal without asymmetric drift.
Adjust the effective 250-300 mm stroke on the fly to accommodate different carton heights on a packaging line, locking the back-rod stop once the new format is set.
Fine-tune the mechanical stop position for varying pallet footprints on a heavy-duty conveyor, relying on the equal push/pull force to halt loads smoothly.
Verify that the 50 mm adjustment window safely covers your required positioning variance. If your application needs less force, the 63 mm bore provides 1402 N at 0.5 MPa; if you need more power, stepping up to the 100 mm bore yields 3681 N at 0.5 MPa. If the stroke never varies, a fixed-stroke SED cylinder offers a shorter overall length.
For direct ISO 15552 replacement, match the 80 mm bore, 300 mm stroke, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because this unit travels 300 mm, external guide rods should be used to absorb lateral loads and prevent rod binding. Note: the air cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 50 mm. The effective stroke range is 250 to 300 mm, which you set and lock during commissioning to achieve the exact end position needed.
Because the rod exits both ends, the force is identical in both directions. It generates 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and reaches a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.