
The AirTAC SEJ Adjustable Cylinder SEJ80X350-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø80mm unit covers an effective stroke of 275–350mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X350-75S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable stroke. A rod exits both ends, yielding identical annulus areas so thrust is equal in both directions at 2268 N each way at 0.5 MPa. A stop screw on the back rod lets you mechanically dial the retract end up to 75 mm, setting an effective stroke range of 275-350 mm without swapping hardware.
This 80 mm bore unit runs at 30-800 mm/s with a PT3/8 port and a Ø25 mm rod. It includes an S magnet for CMSE or DMSE sensors and field-adjustable air cushions at both ends. The extruded aluminum barrel meets ISO 15552 interchangeability with no external tie rods, and the extended overall length provides extra support for external guides.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X350-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 350 mm |
| Adjustment window | 75 mm (275–350 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×350 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 275-350mm stopping height during press commissioning, using the 3175N both-way force to verify tonnage sensors without remounting hardware.
Adjust the retract end to match varying glass pane thicknesses on the fly, maintaining precise alignment via the double-rod's anti-rotation guidance.
Fine-tune the folding arm end position for different carton sizes, shifting the stroke within the 75mm window to avoid mechanical dead-stop impacts.
Verify the 75 mm adjustment window covers your target end-position range, providing 275-350 mm of effective travel. For sizing, stepping down to a 63 mm bore yields 1402 N at 0.5 MPa, while stepping up to a 100 mm bore provides 3681 N at 0.5 MPa. If you only need a fixed reach, a standard SED avoids the stop screw. The air cushion decelerates near stroke end but does not lock; use an external rod lock for fail-safe holding. Because the 350 mm stroke is long, ensure external guides manage side loads to prevent rod bending.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically limits the retract stroke. You can dial it up to 75 mm, giving an effective stroke range of 275-350 mm. Lock the screw after setting your exact end position.
Because the double-rod design creates equal annulus areas, force is identical both ways: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.