
The AirTAC SEJ Adjustable Cylinder SEJ80X400-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø80mm unit covers an effective stroke of 300–400mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X400-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the drive force is perfectly balanced at 2268 N each way at 0.5 MPa. The rear rod stop screw lets you dial the retract end from 300 mm up to 400 mm to perfectly match a machine stop.
Because the barrel is an extruded aluminum profile, there are no external tie rods, and the field-adjustable air cushion at both ends decelerates the 25 mm rod smoothly over a 36 mm cushion length. This -S variant includes a magnet for CMSE reed or DMSE electronic sensors. Note that the cushion and stop screw set the mechanical end and decelerate the load; they do not hold position on air loss.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X400-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 400 mm |
| Adjustment window | 100 mm (300–400 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×400 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm retract window to fine-tune the back-gauge stop for different flange depths, using the 2268 N both-way force to push and pull the gauge finger without ratcheting hardware.
Adjust the retract position to handle variable pallet lengths on a packaging line, using the equal push/pull force to reposition the diverter arm accurately during changeover.
Set precise end positions for trial actuation on a materials test rig, leveraging the 400 mm stroke and adjustable end to find the exact engagement point without re-machining stops.
Confirm the 100 mm adjustment window covers your required end-position variance across the 300-400 mm effective stroke. If 2268 N at 0.5 MPa is insufficient, step up to the 125 mm bore (5734 N); if you have excess margin, step down to the 63 mm bore (1402 N). If your application never requires stroke changes after commissioning, a fixed-stroke SED cylinder provides the same equal-force dynamics in a shorter overall length.
For fail-safe load holding on air loss, add an external rod lock. At 400 mm stroke, the extended rod is prone to side-load deflection, so external guide rails are recommended to prevent binding. When replacing an ISO 15552 unit, match the 80 mm bore, 400 mm nominal stroke, PT3/8 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 100 mm window. You can dial the effective stroke anywhere from 300 mm to 400 mm, then lock the screw in place for precise end-position tuning on the machine.
Because it is a double-rod cylinder, the force is equal in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.