
The AirTAC SGCJ125~160 Adjustable Cylinder SGCJ125X75-30S is a genuine double acting, double rod, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 75mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
The nominal 75 mm stroke serves as the maximum, letting you fine-tune the end position without swapping the unit, while the retract end remains fixed. Four steel tie rods clamp the aluminum barrel to the covers for structural rigidity, and a two-way piston seal ensures reliable bidirectional operation. This bore uses a G1/2 port, a 32 mm rod, and an M27x2.0 rod-end thread.
Because it carries a built-in piston magnet, the -S suffix confirms compatibility with CMSG, DMSG, and EMSG sensor switches for precise position detection. Standard TPU seals offer long life across -20 to +70 C, though a Viton H option extends that range up to 150 C for high-heat environments.
| Model | Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X75-30S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1169 kgf | |
SGCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N. On Ø250 the blank code is the standard NBR build (no TPU).
Dial in the exact insertion depth of bearings or pins on-site using the 30 mm extend-shortening window, avoiding hard mechanical stops.
Fine-tune the actuation angle of a sorting gate by trimming the extend stroke in the field to accommodate varying package sizes.
Adjust the stopping point for pallets on a handling line by up to 30 mm without disassembling the cylinder or changing mounting hardware.
When sizing this actuator, compare it against neighboring bores: the 160 mm variant pushes 10053 N at 0.5 MPa for heavier demands, whereas this 125 mm bore provides 6136 N, making it the low-edge choice for mid-range tasks. The 30 mm adjustable window is particularly useful when you need to synchronize end positions across multiple fixtures or want a shared spare across slight stroke variants. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2 brackets. The included -S magnet supports CMSG, DMSG, and EMSG switches. Even at this 75 mm stroke, always guide the load to prevent side-load binding.
AirtacDistr lists every SGCJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sgcj125-adjustable-double-rod-cylinder
Quick checklist
At 0.5 MPa it pushes 6136 N and pulls 5734 N. At 0.7 MPa it pushes 8590 N and pulls 8028 N. The theoretical maximum is 1251 kgf at 1.0 MPa. This 125 mm bore cylinder features a G1/2 air port, a 32 mm rod, and an M27x2.0 rod thread.
The external adjuster lets you shorten the extend stroke by up to 30 mm on-site, meaning the usable extend range is 45 to 75 mm, with 75 mm being the maximum. The retract end is fixed. This mechanism only sets the end position; it does not lock the load, so you need an external rod lock or pilot-operated check valve to hold a load on air loss.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Large-bore cylinders built to order — confirm lead time.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.