
The AirTAC SGCJ125~160 Adjustable Cylinder SGCJ125X80-30 is a genuine double acting, double rod, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 80mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
A two-way piston seal ensures reliable pressure containment across the 30-500 mm/s speed range.
The -30 code defines an external adjuster window that lets you shorten the extend stroke on-site by up to 30 mm without changing the cylinder itself. The nominal 80 mm stroke remains the maximum, yielding a usable extend range of 50-80 mm, while the retract end stays fixed. You can swap this unit into existing large-bore ISO 15552 mounting interfaces, and the adjustable air cushions absorb 40 mm of impact at each end. This plain SKU lacks a magnet and cannot take a sensor; adding the -S variant enables CMSG, DMSG or EMSG switches.
| Model | Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X80-30 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1169 kgf | |
SGCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N. On Ø250 the blank code is the standard NBR build (no TPU).
Use the 30 mm extend-shortening window to fine-tune the exact bottoming position of a bearing press without physically shimming the machinery.
Adjust the extend stroke on-site to set the precise protrusion distance of a sorting gate to accommodate different package widths on the fly.
Dial in the exact retract stop position for a pallet handling line, allowing operators to shorten the extend stroke by up to 30 mm to match new pallet dimensions.
When sizing this 125 mm bore against its neighbours, the smaller 100 mm class gives less thrust, while the larger 160 mm bore jumps to 10053 N at 0.5 MPa. The on-site extend-shortening window is particularly useful for dialling in precise end positions during commissioning or sharing a single spare cylinder across multiple stroke variants. SGCJ mounting options include FA, LB, TC, FTC, TCM1 and TCM2. Because this 80 mm stroke is short, side-load stress is minimal, but any application approaching 500 mm or more requires an external guide to prevent rod binding. Remember that a plain cylinder drifts on air loss; use an external rod lock or pilot-operated check valve for held loads.
AirtacDistr lists every SGCJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sgcj125-adjustable-double-rod-cylinder
Quick checklist
This 125 mm bore cylinder features a G1/2 port and a 32 mm rod. The theoretical maximum force is 1251 kgf at 1.0 MPa.
The -30 indicates an external adjuster that lets you shorten the extend stroke on-site by up to 30 mm. The nominal 80 mm stroke is the maximum, giving a usable extend range of 50-80 mm, while the retract end remains fixed. This mechanism sets the end position and is not a load lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Large-bore cylinders built to order — confirm lead time.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.